Bedienungsanleitung Carrier 42 HWX (Seite 9 von 12) (Holländisch)

481327

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

GB - 8

42 HWX / HQX

Set combined program

The combined program (a selection of a sequence of start and stop

times) will start and stop the air conditioner daily at the programmed time

without any action from the user. To program this function proceed

as follows:

1. Press button G

until the symbol of the start time program

shows on the display; set now your desired start time in the way

indicated in the “set start time” section.

2. Press button G

again to show the symbol for the stop time

program and set your desired stop time.

3. Press button G

repeatedly, until the symbol for the combined

program appears; together with this symbol, the symbols for the

start and stop programs appear alternatively along with the

respective programmed times.

4. To confirm the program, press button C

. Indicator P on the

unit will light up.

If the programmed times for start and stop coincide, the combined

operation mode will not work.

It is possible to cancel the TIMER operation mode at any time by

pressing button C

: indicator P on the unit will turn off, and the

indication of the timer mode will disappear from display on the controller.

The unit will store the mode in which was operating at that time: on

if it was in operation, on if it was turned off.

When the timer mode is on (unit indicator P

lit) the controller will

always display the symbol relevant to the current timer program; the

time shown is the current time of day.

When only one of the two programs has been selected, i.e. the start

time or the stop time, unit will remain in the selected operating

mode (on or off) after having turned on or off at the selected time.

To change the operating mode, it is necessary to manually start or

stop the unit or select a new program by pressing button C

In case of a power failure during timer mode operation, the unit will

restart, when the power is restored and return to the last operating

position before the power cut: unit indicator P

will flash to show

that the Timer mode is off. To reactivate the timer mode, press

button C

twice.

Time

adjustment

(buttons H and I)

To set the time for the timer programs selected with button G ,

press the buttons H

and I . Buttons H and I also serve

to adjust the time of day on the display under the word CLOCK.

Selecting

the fan speed

(button J)

The fan speed can be selected by pressing button J .

Symbol on display

Low speed

(for night operation)

Medium speed

High speed

(at starting, to reach temperature)

Automatic

(Fan speed will automatically switch to the value required

for optimum comfort).

When this function is activated, the dotted symbols will flash.

Night stop

(button K)

This function optimizes comfort at night with regard to human

metabolism variations.

One hour after activation of this function, the temperature set in

cooling will increase by 1°C, or decrease by 1°C if in heating, up to

2°C in two hours. After 5 hours the unit will stop completely.

The system will operate at the low fan speed to minimize sound

level. When activating this function, the controller will show the time

when the air conditioner will completely stop for a few seconds.

Press button C

to deactivate the function.

Selecting direction

of air flow louver

(button L)

The air flow direction can be adjusted to optimize air distribution in

the room. Press button L

repeatedly to choose one of the

following positions:

Symbol on display

Automatic

Air direction will be set automatically.

Symbol on display

6 positions can be chosen.

The louver can be set to one of 6 different air

flow directions.

The choice “Automatic” is recommended for

cooling or dehumidification modes to avoid

condensation on the louver resulting in dripping

water.

Swing

Louver will continuously swing downward and upward to

obtain an optimal even air distribution in the room.

Adjusting clock time

(button M)

To adjust clock time, put the controller in the ON position by

pressing button B

after having positioned the batteries.

The following procedure will allow adjustment of the clock time:

• Gently press the recessed button at the right corner of the

controller battery compartment with a pointed tool (e.g. a pencil

point): the hour figures will flash.

Use buttons H

and I to adjust their value to the correct time

of day.

• Press the recessed button a second time and the minute figures

will flash. Adjust them to the correct value in the same way .

• Pressing the recessed button a third time will activate the clock

function.

Use of the remote controller

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carrier 42 HWX Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info