Bedienungsanleitung Carrier AKB012 (Seite 3 von 10) (Englisch)

460726

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

GB - 2

General information

Correct use

• Check that the power supply at the installation

site is 230 V (min. 198 V - max. 264 V).

• The unit installation must comply with all

applicable local and national regulations.

• It is recommended to install a circuit breaker

or a 16 A safety fuse upstream of the supply

switch.

• The appliance must always be earthed.

• If an extension lead is needed (up to 25 m)

make sure that the wire section is not less

than 1.5 mm

• Do not locate the air conditioner in laundry

under dripping water (e.g.: clothes hung up

to dry).

• IMPORTANT: Non-compliance with these

safety standards constitutes a fire hazard

in the event of a short-circuit.

• The manufacturer does not accept any

liability if the safety standards are not

observed.

• This unit complies with low-voltage (EEC/

73/23) and electro-magnetic compatibility

(EEC/89/336) directives.

• Performances referred to ISO 5151.2/T1:

indoor temperature: 27°C d.b. - 19°C w.b.

tutdoor temperature: 35°C d.b. - 24°C w.b.

• The unit is designed to operate within the

following temperature limits:

cooling with dehumidification:

indoor temp.: min. 21°C d.b. - 15°C w.b.

max. 32°C d.b. - 23°C w.b.

outdoor temp.: min. 21°C - max. 46°C.

dehumidification: min. 18°C d.b. - 14°C w.b.

max. 27°C d.b.-21°C w.b.

• Inspect equipment for damage due to

improper transportation or handling: In case

of damage file an immediate claim with the

shipping company.

• Do not use damaged equipment. In case of

a malfunction turn the unit off, disconnect

the plug from the power socket and contact

a qualified service engineer.

• Use the unit only for factory approved

applications.

• This equipment contains coolant.

Maintenance of the refrigerant circuit must

only be carried out by qualified personnel.

• All of the manufacturing and packaging

materials used for your new appliance

are compatible with the environment

and can be recycled.

• Dispose of the packaging material in

accordance with local requirements.

• This equipment contains coolant that must

be disposed of in a proper manner. When

disposing of the unit after its operational life,

remove it carefully. The unit must then be

delivered to an appropriate disposal center

or to the original equipment dealer, for proper

environmentally friendly disposal.

IMPORTANT: for UK only

The wires in this mains lead are coloured in

accordance with the following code:

Green-and-Yellow : Earth

Blue : Neutral

Brown : Live

As the colours of the wires in the mains lead

of this appliance may not correspond with

the coloured markings identifying the

terminals in your plug, proceed as follows:

• The wire which is coloured green-and-

yellow must be connected to the terminal

in the plug which is marked with the letter

E or by the earth symbol or coloured green

or green-and-yellow.

• The wire which is coloured blue must be

connected to the terminal which is marked

with the letter N or coloured black.

• The wire which is coloured brown must be

connected to the terminal which is marked

with the letter L or coloured red.

The outdoor unit may be hung on the back

of the indoor unit with the flexible tube

neatly coiled, but never kinked, to allow

air conditioner to be moved from room to

room. It is recommended to move the unit

holding the front panel as illustrated.

The air conditioner models 51AKB009 and 51 AKB012 consist

of two units connected by a flexible tube of 1.8 metre length.

Models 51AKC009 and 51AKC012 are provided with a flexible

tube of 3.6 metre length and quick coupling connections that

allow the units to be disconnected up to a maximum of six times

without impairing air conditioning performance.

This operation must always be carried out by qualified and

authorized personnel.

The elegant portable indoor

unit may be positioned

conveniently in the room to

be air conditioned.

IMPORTANT

At first start-up of the unit

proceed as follows:

• take out the water tank at the rear

of the air conditioner

• remove the adhesive tape strip

• replace the tank correctly in its

position

If the above procedure is not

followed, the unit will not operate

and indicate a fault.

The compact, light weight

outdoor unit is placed

outdoors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carrier AKB012 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info