Bedienungsanleitung Carrier PC-09HPPD (Seite 9 von 18) (Englisch)

717502

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

OPERATING INSTRUCTIONS

Operating Instructions

- Press the "MODE" button until the "COOL"

indicator light comes on.

- Press the ADJUST buttons "+" or " - " to

select your desired room temperature. The

temperature can be set within a range of

O O O O

17 C-30 C/62 F-88 F.

- Press the "FAN SPEED" button to choose the

fan speed.

- Press the "MODE" button until the "DRY"

indicator light comes on.

- Under this mode, you cannot select a fan

speed or adjust the temperature. The fan

motor operates at LOW speed.

- Keep windows and doors closed for the

best dehumidifying effect.

- Do not put the duct to window.

COOL operation

- Press the "MODE" button until the

"FAN " indicator light comes on.

- Press the "FAN SPEED" button to

choose the fan speed. The temperature

cannot be adjusted.

- Do not put the duct to window.

FAN operation

TIMER operation

- Press the "MODE" button until the "HEAT"

indicator light comes on.

- Press the ADJUST buttons "+" or " - " to

select your desired room temperature. The

temperature can be set within a range of

O O O O

17 C-30 C/62 F-88 F.

- Press the "FAN SPEED" button to choose the

fan speed. For some models, the fan speed

can not be adjusted under HEAT mode.

HEAT operation(cooling only models without)

AUTO operation

- When you set the air conditioner in AUTO

mode, it will automatically select cooling,

heating(cooling only models without), or

fan only operation depending on what

temperature you have selected and the

room temperature.

- The air conditioner will control room

temperature automatically round the

temperature point set by you.

- Under AUTO mode, you can not

select the fan speed.

FOLLOW ME/TEMP SENSING feature(optional)

To activate the Follow Me/Temp Sensing

feature, point the remote control towards

the unit and press the Follow Me/Temp

Sensing button. The remote display is

actual temperature at its location. The

remote control will send this signal to the

air conditioner every 3 minutes interval

until press the Follow Me/Temp Sensing

button again.If the unit does not receive

the Follow Me/Temp Sensing signal during

any 7 minutes interval, the unit will beep to

indicate the Follow Me/Temp Sensing mode

has ended.

NOTE:This feature can be activated from the

remote control ONLY. The remote control

servesas a remote thermostat allowing for the

precise temperature control at its location.

- When the unit is on, press the

Timer button will initiate the Auto-off

stop program, the TIMER OFF

indicator light illuminates. Press the

UP or down button to select the desired

time. Press the TIMER button again

within 5 seconds, the Auto-on start

program is initiated. And the TIMER

ON indicator light illuminates. Press

the up or down button to select the

desired Auto-on start time.

- When the unit is off, press the Timer

button to initiate the Auto-on start

program,press it again within five

seconds will initiate the Auto-off stop

program.

- Press or hold the UP or DOWN

button to change the Auto time by

0.5 hour increments, up to 10 hours,

then at 1 hour increments up to 24

hours. The control will count down

the time remaining until start.

- The system will automatically revert

back to display the previous temper-

ature setting if there is no operation

in a five seconds period.

Error codes and protection code:

E1- Room temperature sensor error-

Unplug the unit and plug it back in.

If error repeats, call for service.

E2- Evaporator temperature sensor error-

Unplug the unit and plug it back in.

If error repeats, call for service.

E3- Condenser temperature sensor error-

Unplug the unit and plug it back in. If error

repeats, call for service (on some models).

E4- Display panel communication error-

Unplug the unit and plug it back in.

If error repeats, call for service.

P1- Bottom tray is full - Connect the

drain hose and drain the collected

water away. If protection repeats, call

for service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carrier PC-09HPPD Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info