Bedienungsanleitung Carson Reflex Pro 3 Nano-Gyro 2.4G (Seite 2 von 2) (Deutsch, Englisch)

722416

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

GB // Service-Hotline for Germany: 03675 7333 343 // www.carson-modelsport.de

Receiver Reex Pro 3 Nano + Gyro 2.4G

500501539 // Revision: May 2017

SETTING REV/NOR

SPECIFICATIONS

MOUNTING THE RECEIVER

SETTING FAIL SAFE

Channels: 4

Frequency: 2.4 GHz

Input voltage: 6V

Dimensions: 34x14x18mm

The Reflex PRO 3 Nano receiver with integrated gyro has 3 channels and an AUX output.

In addition to its normal functions, this receiver has an intelligent vehicle controller, which ensures that the vehicle always keeps to the

desired direct of travel on bends or uneven surfaces.

Use the double-sided adhesive tape included in the delivery to

secure the receiver.

Secure it to a clean and horizontal surface.

Please take note of the correct mounting position!

Works only on channel 2!

1. Switch off the receiver

2. Connect the "binding cable" to the receiver using the " FAIL

SAFE PINs" . connection, see figure.

3. Switch on the receiver (LED flashes)

4. Bring the remote control into the desired " FAIL-SAVE" posi-

tion and switch on.

5. Hold the position until the LED is lit permanently.

6. Switch off the receiver and remove the "binding cable".

1. Switch off the receiver

2. Connect the “binding

cable”to the receiver using

the "PAIR PINs" connection,

see figure.

3. Switch on the receiver (LED

flashes)

4. Switch on the remote

control (LED flashes

permanently - binding

completed).

5. Switch off the receiver

and remove the "binding

cable” again.

GENERAL

BINDING THE RECEIVER

SETTING THE SENSITIVITY

Mounting position

Adhesive

tape

"GAIN button" Adjustment of

steering correction

How strongly the receiver

shall correct when steering is

adjusted here.

1. Alteration of the setting – Choice of 8 levels:

- Level 1: highest sensitivity

- Level 7: lowest sensitivity

- Level 8: without control

2. The red LED on the receiver indicates the present level by

the number of flashes (1-8) .

Should the gyro function be

active in the wrong direction,

you can alter this situation with

the REV/NOR button.

• Switch on the receiver and then press and hold the REV/NOR

button for 3-4 seconds

• The LED on the receiver flashes 2x to indicate that the direc-

tion has been altered

Declaration of conformity

Hereby, Tamiya-Carson GmbH & Co. KG declares that the radio equipment type

is in compliance with the directive 2014/53/EU. The full text of the EU declaration

of conformity is available at the following internet address.

http://www.carson-modelsport.com/de/produkte.htm

Meaning of the symbol on the product, packaging or instructions

for use: Electrical appliances contain valuable recyclable materials

and should not be discarded in the domestic waste at the end of

their life!

Help us protect the environment and conserve resources

by taking this appliance along to the appropriate local recycling

centre. Your local waste management organisation or specialist

dealer will be able to answer any queries you may have.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carson Reflex Pro 3 Nano-Gyro 2.4G Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info