Bedienungsanleitung Carson Virus Race 4.1 4S Brushless (Seite 28 von 66) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

722422

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

GB // 28

PROGRAM THE ESC

1. Programmable items (the italics texts in the form are the default settings)

2. Explanation for each programmable item

Running mode

With “Forward with Brake” mode, the car can go forward and brake,

but cannot go backward, this mode is suitable for competition.

“Forward/reverse with brake” mode provides backward function,

which is suitable for daily training.

But for ESC, “Forward/reverse with brake” mode uses the “Sing

le-click” method to make the car go backward.

“Forward/reverse” mode uses the “Single-click” method to make the

car go backward. When you move the throttle lever from forward

zone to backward zone, the car will go backward immediately.

Drag brake force in neutral position

Set the amount of drag brake applied at neutral throttle to simulate

the slight braking effect of a neutral brushed motor while idle speed.

Low voltage cut-off

The function prevents the lithium battery pack from over dischar-

ging. The ESC detects the battery’s voltage at any time. If the voltage

is lower than the threshold for 2 seconds, the output power will

be reduced 70%, 10 seconds later the output will be completely

stopped, and the red LED flashes in such a style: “

” (double

flashes).

Acceleration mode (also called “Punch”)

Select from “Level 1” to “Level 9”. A higher number means more

aggressive acceleration.

Maximum Brake Force

The ESC provides proportional brake function. The brake force is

related to the position of the throttle stick. Maximum brake force

refers to the force when the throttle stick is located at the top point

of the backward zone. A very large brake force can shorten the brake

time, but it may damage the gears.

3. Program the ESC with the “SET” button

You’ll find the instructions on the next page in the flowchart.

4. Reset all items to default values

At any time when the throttle is located in neutral zone (except in

the throttle calibration process or ESC program mode), you can hold

the “SET” key for over 3 seconds. The red LED and green LED will

flash at the same time, which means each programmable item has

be reset to its default value.

Programmable items for Dragster 4S

Programmable item Programmable value

1 2 3 4 5 6 7 8 9

1. Running mode Forward

with

brake

Forward/

backward

with

brake

Forward/

back

ward

2. Drag brake force in neutral

position

0 % 5 % 10 % 20 % 40 % 60 % 80 % 100 %

3. Low voltage cut-off threshold Nonpro

tection

2.6 V /

Zelle

2.8 V /

Zelle

3.0 V /

Zelle

3.2 V /

Zelle

3.4 V /

Zelle

4. Start mode (punch) Level

(Soft)

Level

(Aggre-

siv)

5. Maximal brake force 25 % 50 % 75 % 100 %

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Carson Virus Race 4.1 4S Brushless Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info