727569

Casals CPLI18K2 Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
5
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
- Use power tools only with specically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
- When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
- Under abusive conditions, liquid
may be ejected from the battery; avoid
contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes,
additionally seek medical help. Liquid
ejected from the battery may cause irritation
or burns.
- Do not use a battery pack or tool that
is damaged or modied. Damaged or
modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk
of injury.
- Do not expose a battery pack or tool to
re or excessive temperature. Exposure
to fire or temperature above 130ºCmay
cause explosion.
- Follow all charging instructions and
do not charge the battery pack or tool
outside the temperature range specied
in the instructions. Charging improperly or
at temperatures outside the specified range
may damage the battery and increases the
risk of fire.
- Remove the batteries from the appliance
if you are not going to use it for some time.
- Disconnect the battery charger from
the mains when not in use and before
- Disconnect the plug from the power
source and/or battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories,
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally.
- Store idle power tool out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
- Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
power tool’s operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools.
- Keep cutting tools sharp and clean
.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
- Use the power tool, accessories and
tool bits etc in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
- Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of the
tool in unexpected situations.
Battery tool use and care
- Recharge only with the charger
specied by the manufacturer. A charger
undertaking any cleaning task.
- Do not open the battery/ies under any
circumstances whatsoever.
- When the battery/ies is not in use, keep
it away from other metal objects like paper
clips, coins, keys, screws ... that could
connect a terminal to another.
- The battery/ies should be stored at a
temperature of below 40ºC.
Service
- Have your power tool serviced by
a qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained
- Never service damaged battery packs.
Service of battery packs should be only
be performed by the manufacturer or
authorized service providers.
-Any misuse or failure to follow the
instructions for use renders the guarantee
and the manufacturer’s liability null and
void.
Drill safety warnings
- Wear ear protectors when impact
drilling. Exposure to noise can cause
hearing loss.
- Use auxiliary handle(s), if supplied
with the tool. Loss of control can cause
personal injury.
- Hold power tool by insulated
gripping surfaces, when performing an
operation where the cutting accessory
may contact hidden wiring. Cutting
accessory contacting a “live” wire may
make exposed metal parts of the power
tool “live” and could give the operator an
electric shock.
… 5 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casals CPLI18K2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info