Bedienungsanleitung Casals CSS710VCE (Seite 4 von 66) (Alle Sprachen)

799647

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

-Disconnect the plug from the power source and/

or battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally

-Store idle power tool out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users

-Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s op-

eration. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools

-Keep cutting tools sharp and clean. Properly main-

tained cutting tools with sharp cutting edges are less

likely to bind and are easier to control

-Use the power tool, accessories and tool bits etc

in accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations dif-

ferent from those intended could result in a hazardous

situation.

Service

-Have your power tool serviced by a qualied re-

pair person using only identical replacement parts.

This will ensure that the safety of the power tool is

maintained

-Any misuse or failure to follow the instructions for use

renders the guarantee and the manufacturer’s liability

null and void.

Safety instructions for Drywall Sanders

-This power tool is intended to function as a sand-

er. Read all safety warnings, instructions, illustra-

tions and specications provided with this power

tool. Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

-Operations such as grinding, wire brushing, pol-

ishing or cutting-off are not recommended to be

performed with this power tool. Operations for which

the power tool was not designed may create a hazard

and cause personal injury.

-Do not use accessories which are not specically

designed and recommended by the tool manufac-

turer. Just because the accessory can be attached to

your power tool, it does not assure safe operation.

-The rated speed of the accessory must be at least

equal to the maximum speed marked on the power

tool. Accessories running faster than their rated speed

can break and fly apart.

-The outside diameter and the thickness of your ac-

cessory must be within the capacity rating of your

power tool. Incorrectly sized accessories cannot be

adequately guarded or controlled.

- Threaded mounting of accessories must match

the grinder spindle thread. For accessories mount-

ed by anges, the arbour hole of the accessory

must be t the locating diameter of the ange. Ac-

cessories that do not match mounting hardware of the

power tool will run out of balance, vibrate excessively

and may cause loss of control.

-Do not use a damaged accessory. Before each use

inspect the accessory such as abrasive wheels for

chips and cracks, backing pad for cracks, tear or

excess wear, wire brush for loose or cracked wires.

If power tool or accessory is dropped, inspect for

damage or install an undamaged accessory. After

inspecting and installing an accessory, position

yourself and bystanders away from the plane of

the rotating accessory and run the power tool at

maximum no-load speed for one minute.

Damaged accessories will normally break apart during

this test time.

-Wear personal protective equipment. Depending

on application, use face shield, safety goggles or

safety glasses. As appropriate, wear dust mask,

hearing protectors, gloves and workshop apron ca-

pable of stopping small abrasive or workpiece frag-

ments. The eye protection must be capable of stopping

flying debris generated by various operations . The dust

mask or respirator must be capable of filtrating particles

generated by your operation. Prolonged exposure to

high intensity noise may cause hearing loss.

-Keep bystanders a safe distance away from work

area. Anyone entering the work area must wear

personal protective equipment. Fragments of work-

piece or of a broken accessory may fly away and cause

injury beyond immediate area of operation.

- Position the cord clear of the spinning accessory.

If you loose the control, the cord may be cut or snagged

and your hand or arm may be pulled into spinning

accessory.

- Never lay the power tool down until the accessory

has come to a complete stop. The spinning acces-

sory may grab the surface and pull the power tool out

of your control.

- Do not run the power tool while carrying it at your

side. Accidental contact with the spinning accessory

could snag your clothing, pulling the accessory into

your body.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casals CSS710VCE Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info