Bedienungsanleitung Casals JHP16 (Seite 16 von 72) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

727555

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

existing parts/accessories.

- Any misuse or failure to follow the instructions

for use renders the guarantee and the manufac-

turer’s liability null and void.

DESCRIPTION

A Pump switch on/off

B Water Connection tuve (not included)

C Water Inlet*

D High pressure tube

E Water Outlet*

F Spray gun

G Extension Pipe

H Spray nozzle pipe

I Nozzle**

J Detergent conatiner*

K Soap Nozzle*

L Mains power cord

M Tip Cleaner

(*) Change position depending on the model.

(**) Nozzle in JHP18 has two adjustable rings.

One for spray angle and other for pressure level.

If the model of your appliance does not have the

accessories described above, they can also be

bought separately from the Technical Assistance

Service.

USE

MOUNTING THE APPLIANCE

- Attach the High-pressure tube to the water

outlet of the machine ensuring that’s is well

connected (Fig.1 Change position depending on

the model).

- Attach the spray gun to the high-pressure tube

(Fig. 2).

- Mount the extension pipe (Fig. 3), the soap

nozzle (Fig. 4) or the spray nozzle pipe into the

spray gun (Fig. 5)

- Connect the machine to water and power

supplies.

- NOTE: If you notice that the appliance have

some loses in water connections, you could use

teón tape in order to improve this connections.

- WARNING: Ensure that high-pressure tube is

completely uncoiled before any use.

- WARNING: The water entering to the appliance

should not exceed the 50ºC.

PRE-OPERATION

- Useful information for during the use.

- WARNING: Before adjusting any kind of the

features this appliance includes, switch off the

appliance, turn off the water supply and discon-

nect the appliance from the mains.

ADJUSTING THE WATER JET OUTLET

- The angle of spray coming out the appliance

can be adjusted by rotating the nozzle. This

will vary the spray patter approximately from a

narrow stream (high impact) to a 60º wide fan

spray.

CLEANING THE NOZZLE

- To clean the nozzle, use the Tip cleaner (M) on

the nozzle water outlet, so you will have to in-

troduce the cleaning tip and move during 50-60

seconds in order to erase any water disturbance

on the nozzle.

DETERGENT APPLICATION

JHB70, JHP14, JHP16

- In order to use the detergent function, take the

soap bottle out of the soap nozzle and ll it with

an adequate cleaning product, suitable for this

kind of products. Connect again the soap bottle

to the soap nozzle (Fig. 6).

- After you used all the detergent in the bottle,

rell it or replace it for the lance in order to nish

cleaning task.

- WARNING: this appliance constantly takes the

soap. If you are using the appliance with deter-

gent and you want to stop using detergent but

continue cleaning, take out the detergent tube,

placed in the soap tank.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casals JHP16 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info