799656

Casals VD2000M Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
5
- Make sure that all the product’s packaging has been
removed.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the
appliance.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- To save energy only switch the power tool on when
using it.
Switching on:
- Press the On/Off Switch (4) to position I or II.
Switching off:
- Press the On/Off Switch (4) to position 0.
Setting the air ow and temperature:
With the On/Off Switch you can selector between
different temperatures and air ows combinations:
Setting ºC l/min
Position I 400 300
Position II 600 500
Removing the heat protection:
- The heat protection collar (2) can be removed when
working at hard-to-reach locations.
- CAUTION: Increased danger of burning exists when
working without the heat protection collar
- Unplug the appliance from the mains.
- Allow the hot air gun to cool down.
- Turn the heat protection collar (2) anticlockwise to
remove and in clockwise direction to mount again.
Placing Down the power tool (Fig C):
- To cool down the power tool place it down on the
standing surface (3)
Working Advice
- The ideal temperature must be obtained by
performing a test
- The distance between the nozzle and the workpiece is
dependant of the material to be processed.
Remove paint/dissolving adhesives
- Soften the paint using the hot air gun and remove
evenly with the scraper.
- Do not heat for too long since this will burn the paint.
Removing paints from windows
- Always use the glass protection nozzle (5).
- Do not use the appliance if its accessories are not
properly tted.
- Do not use the appliance if the on/off switch does not
work.
- Use the appliance handle/s, to catch it or move it.
- If you use the appliance in a bathroom or similar place,
unplug the appliance from the mains when it is not in
use, even if it is only for a short while, as proximity to wa-
ter involves a risk, even if the appliance is disconnected.
- Unplug the appliance from the mains before replacing
any accessory.
- Unplug the appliance from the mains when not in use
and before undertaking any cleaning task.
- This appliance is for household use.
- This appliance should be stored out of reach of children
and/or the disabled.
- Do not store or transport the appliance if it is still hot.
- Use the appliance and its accessories and tools in ac-
cordance with these instructions, taking into account the
working conditions and the work to be performed. Use
the appliance for operations different from those intend-
ed could result in a hazardous situation.
- Is recommended use safety gloves
- Never leave the appliance unattended while in use.
- Do not use the appliance on any part of the body of a
person or animal.
- Do not use the appliance with pets or animals.
- Do not use the appliance to dry textiles of any kind.
Service
-Have your power tool serviced by a qualied repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained
-Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability
null and void.
Description (g. A, B, C)
1 Nozzle
2 Heat protection collar
3 Standing surface
4 On/Off Switch
5 Glass protection Nozzle
6- Reector Nozzle
7- Scrapper Nozzle
8- Reducer Nozzle
Instructions for use
Before use:
- Unplug the appliance from the mains.
- Soften the paint using the hot air gun and remove
evenly with the scraper and a wire brush.
Shaping plastic tubing
- Use the reector Nozzle
- To avoid kinking of the tubing, ll the tubing with sand
and seal at both ends.
- Heat the tubing evenly by moving it from side to side.
- Fit the cone
Staining wood
- Use the cone nozzle.
- Do not hold the nozzle too close to the wood as this will
color the wood unevenly.
- Sand off any singed wood bres afterwards using ne
emery paper.
Shrink fitting
- Use the cone nozzle.
- Selector a proper heat-shrinkable sleeve.
- Heat the heat-shrinkable sleeve evenly.
Defrosting water pipes
- Do not attempt to defrost PVC piping.
- Use the reector Nozzle
- Heat the frozen area inwards from the edge to the center.
Once you have nished using the appliance:
- Press the On/Off Switch (4) to position 0.
- Disconnect the appliance from the mains.
Safety thermal protector:
- The appliance has a safety device, which protects the
appliance from overheating.
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Clean the electrical equipment and the mains connection
with a damp cloth and dry. DO NOT IMMERSE IN WATER
OR ANY OTHER LIQUID.
- Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
- Never submerge the appliance in water or any other
liquid or place it under running water.
- If the appliance is not in good condition of cleanliness, its
surface may degrade and inexorably affect the duration of
the appliance’s useful life and could become unsafe to use.
… 5 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casals VD2000M wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info