Bedienungsanleitung Casio 2220 - WristCamera (Seite 4 von 8) (Englisch)

534449

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

2220-4

SET

NAME

DEL

Pointer

DEL

ALL

PAGE

Attaching Text to an Image

You can use the following procedure to attach up to 24 characters of text for

each image.

To attach text to an image

1. In the VISUAL DATABANK Mode, use E

(+) and B (–) to display the image to

which you want to attach text.

2. Hold down A for about one second until

the SET menu appears.

• Make sure the pointer is next to NAME on

the menu.

3. Press F to display the text input screen.

4. Input the text you want.

• Use E (+) and B (–) to cycle through

available characters in the sequence shown

below at the current cursor location.

• Holding down either button scrolls at high

speed.

A to ZSpace

Press E. Press B.

• ~_?: .— ,

0 to 9 & ’ ()

• Use D (right) and C (left) to move the cursor.

5. After the text is the way you want, press A or F to save it.

Note

• The watch automatically stores any input text and exits the text input

screen if you do not perform any operation for about two minutes.

• See “To view recorded images” for information about showing and hiding

text attached to images.

Image Sorting

Images in watch memory are automatically sorted according to the first two

letters of their attached text (alpha characters → numbers → symbols).

Images that do not have any attached text come last, sorted according to

their recording dates (oldest first).

• If multiple images have text that start with the same two characters, those

images are sorted according to their recording dates (oldest first).

Deleting Images

You can use the following procedures to delete a specific image or all images

currently stored in watch memory.

To delete all images in watch memory

1. In the VISUAL DATABANK Mode, hold

down A for about one second until the

SET menu appears.

2. Press E to move the pointer to DEL.

3. Press F to display the DEL (delete) menu.

SET

NAME

DEL

2000. 6.30.

PM 10:05

Cursor

4. Press F and a confirmation message

appears on the display.

5. If you really want to delete all images in

memory, press E to move the pointer to

YES and then press F. To clear the

confirmation message without deleting

anything, leave the pointer at NO and

press F.

• The message WAIT DEL ALL remains on

the display as the delete operation is in

progress. The message EMPTY appears

after the delete operation is complete.

6. After the EMPTY message appears, press D to enter the Alarm Mode or

F to enter the Camera Mode.

• If you do not perform any operation for about two minutes while the SET,

DEL, or ALL menu is on the display, the watch automatically exits the

menu and returns to the VISUAL DATABANK screen.

Note

• You can return to the normal VISUAL DATABANK Mode during the above

procedure by pressing the A button at any point before actually deleting

the image in step 5.

To delete a specific image

1. In the VISUAL DATABANK Mode, use E (+) and B (–) to display the

image you want to delete.

2. Hold down A for about one second until the SET menu appears.

3. Press E to move the pointer to DEL.

4. Press F to display the DEL (delete) menu.

5. Press E to move the pointer to PAGE.

6. Press F and a confirmation message appears on the display.

7. If you really want to delete the image, press E to move the pointer to

YES and then press F. To clear the confirmation message without

deleting anything, leave the pointer at NO and press F.

• The message WAIT DEL PAGE remains on the display as the delete

operation is in progress. The watch automatically clears the message and

returns to the normal VISUAL DATABANK Mode after the delete operation

is complete.

Note

• You can return to the normal VISUAL DATABANK Mode during the above

procedure by pressing the A button at any point before actually deleting

the image in step 7.

ALL

YES

TIMEKEEPING MODE

The Timekeeping Mode is the default mode of

the watch when you are not recording images,

using the stopwatch, etc.

• You can use the Viewer Screen to view

images in watch memory.

• See “To set the time and date” for

information about setting the time and date,

and for selecting either 12-hour or 24-hour

timekeeping.

To reset the seconds count to zero

1. In the Timekeeping Mode, hold down A for about one second until the

seconds digits start to flash on the display. This indicates the setting

screen.

2. Press E to reset the seconds count to 00.

• Pressing E while the seconds count is in the range of 30 to 59 resets the

seconds to 00 and add 1 to the minutes. In the range of 00 to 29, the

minutes count is unchanged.

3. Press A to exit the setting screen and return to the Timekeeping Mode.

Note

• The watch automatically exits the setting screen if you do not perform any

operation for about two minutes.

To switch between Timekeeping Mode screen formats

In the Timekeeping Mode, each press of C toggles between the two screen

formats shown below.

FRI

3‰

1‰:58

PM indicator

Day of the week

Day

Hour : Minutes

Seconds

FRI

3‰

1‰:58

3‰

1‰:58

▲

Day of the week Day

Month

Day

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 2220 - WristCamera Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2220 - WristCamera

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info