Bedienungsanleitung Casio 2220 - WristCamera (Seite 5 von 8) (Englisch)

534449

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

2220-5

Using the Viewer Screen

The press of a button in the Timekeeping Mode displays the Viewer Screen,

which you can use to view images stored in memory.

Important!

• The watch does not emit any alarm, Hourly Time Signal, or Countdown Alarm

sound while the Viewer Screen is on the display. Instead, the message ALM

flashes in the upper left corner of the display when an alarm time is reached,

and the message TMR flashes when the countdown reaches zero.

To display the Viewer Screen

1. In the Timekeeping Mode, press E or B

to display the image that was on the

display the last time you exited the Viewer

Screen or the VISUAL DATABANK Mode.

2. Use E (+) and B (–) to scroll through the

images in memory.

• Holding down either button scrolls at high

speed.

• Hold down C to view the recording date

and time of the displayed image, and text

attached to the image, if there is any.

• The image may appear somewhat dark

while recording date and time (and attached

text, if any) are on the display.

3. To close the Viewer Screen and return to

the Timekeeping Mode display, press D.

• The watch automatically exits the Viewer

Screen if you do not perform any operation

for about 15 seconds.

To adjust image contrast

1. In the Timekeeping Mode, press E or B to display the Viewer Screen.

2. Press A to display the current image contrast setting value in the upper

left corner of the display.

3. Use B (darker) and E (lighter) to adjust the contrast to any one of the

15 available levels.

4. After the contrast setting is the way you want, press A to apply the

setting and exit the setting screen.

Note

• The above procedure affects the contrast of images only. See “Contrast

Adjustment” for information about adjusting the contrast of other screens.

ABE KEIKO

012-034-5678

2000. 6.30.

PM 10:05

Text

Recording date

and time

AL2

12:‰‰

OFF

Alarm time

(Hour : Minutes)

Alarm name

(Alarm 2)

AL2

12:‰‰

ALARM MODE

You can use the Alarm Mode to set five

independent alarms. You can also turn on an

Hourly Time Signal that causes the watch to

beep every hour on the hour.

Important!

• The watch does not emit any alarm or

Hourly Time Signal sounds while it is in the

Camera Mode, VISUAL DATABANK Mode,

or IR Mode, or while the Timekeeping

Mode’s Viewer Screen is on the display.

• In the case of the VISUAL DATABANK

Mode and Viewer Screen, the message

ALM flashes in the upper left corner of the

display when an alarm time is reached.

To set the alarm time

1. In the Alarm Mode, use E (+) and B (–) to display the screen for the

alarm whose time you want to set.

Alarm 1

(AL1)

Alarm 2

(AL2)

Alarm 5

(AL5)

Alarm 4

(AL4)

Alarm 3

(AL3)

Hourly Time Signal

(SIG)

2. After you select an alarm, hold down A

until the hour digits of the alarm time start

to flash on the display.

• The hour digits are flashing because they

are

selected

• This operation automatically turns on the

alarm.

The on/off

status of each

alarm is

indicated here.

Hourly time

Signal on

indicator

Alarm on indicator

3. While the hour setting is flashing, use E (+) and B (–) to change it.

• Holding down either button changes the setting at high speed.

• When setting the alarm time using the 12-hour format, take care to set the

time correctly as am (A indicator) or pm (P indicator).

4. Press D so that the minute digits of the alarm time start to flash.

• Each press of D moves the flashing between Hour and Minutes.

5. While the minutes setting is flashing, use E (+) and B (–) to change it.

• Holding down either button changes the setting at high speed.

6. Press A to exit the setting screen.

Note

• The watch automatically exits the setting screen if you do not perform any

operation for about two minutes.

Daily Alarm Operation

The alarm sounds at the preset time each day for about 20 seconds, or until

you stop it by pressing any button.

To test the alarm

In the Alarm Mode, hold down C to sound the

alarm.

To turn a daily alarm and the Hourly

Time Signal on and off

1. In the Alarm Mode, use E (+) and B (–)

to display an alarm screen or the Hourly

Time Signal screen.

2. When the alarm or Hourly Time Signal you

want is selected, press C to turn it on and

off.

• The alarm on indicator and the Hourly Time

Signal on indicator are shown on the display

in the Timekeeping, Alarm, Countdown

Alarm, and Stopwatch Modes.

• If any alarm is on, the alarm on indicator is

shown on the display.

COUNTDOWN ALARM MODE

The Countdown Alarm Mode lets you set a start time of up to 60 minutes. A

Countdown Alarm sounds when the countdown reaches zero.

Important!

• The watch does not emit the Countdown Alarm sound while it is in the

Camera Mode, VISUAL DATABANK Mode, or IR Mode, or while the

Timekeeping Mode’s Viewer Screen is on the display.

• In the case of the VISUAL DATABANK Mode and Viewer Screen, the

message TMR flashes in the upper left corner of the display when the end

of the countdown is reached.

To set the countdown start time

1. In the Countdown Alarm Mode, hold down

A until the minutes setting of the

countdown alarm start to flash.

2. While the minutes setting is flashing, use

E (+) and B (–) to change it.

• Holding down either button changes the

setting at high speed.

3. Press A to exit the setting screen.

Note

• The watch automatically exits the setting screen if you do not perform any

operation for about two minutes.

Using the Countdown Alarm

• Each press of E starts and stops the

countdown.

• The time is counted down on the display in

one-second increments.

• Pressing B while a countdown is stopped

resets the countdown to the countdown start

time.

• When the countdown reaches zero, an

alarm sounds for about 10 seconds or until

you stop it by pressing any button.

TMR

6‰

‰‰

TMR

Seconds

Minutes

AL2

12:‰‰

Casio 2220 - WristCamera Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2220 - WristCamera

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info