Bedienungsanleitung Casio 2412 (Seite 1 von 7) (Englisch)

586704

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

USER’S GUIDE 2412

Getting Acquainted

Congratulations upon your selection of the CASIO Wrist Camera (this watch).

To get the most out of your purchase, be sure to read this manual carefully,

and keep the manual and everything contained in the package on hand.

About This Manual

• Button operations are indicated using the letters

shown in the illustration.

• The sizes and positions of the characters shown on

the sample displays in this manual may differ

slightly from those that actually appear on the

display of your watch.

• When performing operations with this watch, you

must first enter the correct mode (Camera Mode,

Timekeeping Mode, etc.) See “General Guide” for

information about maneuvering between modes.

• Each section of this manual provides you with the information you need to

perform operations in each mode. Further details and technical information

can be found in the “Reference” section.

• To ensure that this watch provides you with the years of service for which it is

designed, be sure to read and follow the instructions under “User

Maintenance”.

SAT

3‰

1‰

Before Using the Watch...

To set the time and date

1.In the Timekeeping Mode, hold down A for about

one second until the seconds start to flash on the

display, which indicates the setting screen.

• Use D to cycle around the setting screen in the

sequence shown below.

2. While a setting is flashing, use E (+) and B (–) to change it.

• Pressing E while the seconds are flashing resets them to 00. See “To

reset the seconds to zero” for more information.

• Holding down either button scrolls at high speed.

3. When everything is the way you want it, press A to exit the setting screen.

• The day of the week is set automatically in accordance with the date

setting.

• The watch’s built-in full automatic calendar makes allowances for

different month lengths and leap years.

• The year can be set in the range of 2000 to 2039. Going past

December 31, 2039 reverts to January 1, 2000.

• See “To adjust the display contrast” for more information about the

contrast setting.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press E to toggle between12-hour timekeeping

(indicated by A or P on the display), or 24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour

digits for times in the range of noon to 11:59 p.m. and the A (AM) indicator

appears to the left of the hour digits for times in the range of midnight to

11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59,

without any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode

is applied in all modes.

To adjust the display contrast

1. In the Timekeeping Mode, hold down A for about

one second until the seconds start to flash, which

indicates the setting screen.

2. Use D to cycle through the available settings until

the contrast adjustment screen is on the display.

• The contrast setting shows a value that indicates

the current contrast level. A setting of Level 4, for

example, is indicated as CNT4.

3. Use B (Darker) and E (Lighter) to adjust the contrast to any one of the

nine available levels.

• You can set display contrast in the range of CNT1 through CNT9. The

initial default setting is CNT5.

4. Press A to exit the setting screen.

Note

The contrast setting described above does not affect the display of images.

Image contrast can be adjusted using a separate procedure, which is

described in “To adjust image brightness”.

'‰1

3‰

1‰

Seconds

Hour

Minutes

Year

Month

Contrast

Setting

Day

Press .

CNT

Specifying the Display Color Pattern

You can select from among three color combinations patterns and two layouts

for a total of six different Timekeeping Mode color patterns.

To change the display color pattern

In the Timekeeping Mode, press B.

• Each press of B cycles through available display color patterns in the

sequence shown below.

• Note that the display color pattern you make here is applied in other modes,

too.

Auto Power Save

The watch automatically turns off its display screen

if it is not moved and/or if you do not perform any

operation on it for about 60 minutes.

This not only conserves battery power, it also

protects against “burn in” of display images.

To turn the display back on, press

This displays the Timekeeping Mode screen .

SAT

3‰

1‰

SAT

3‰

1‰

SAT

3‰

1‰

Press B.

▲

White on blue White on black

Blue on white

SAT

3‰

1‰

SAT

3‰

1‰

SAT

3‰

1‰

▲

White on blue

White on black

Blue on white

▲

SAT

3‰

1‰

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 2412 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2412

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info