Bedienungsanleitung Casio 2471 (Seite 4 von 8) (Englisch)

586702

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

USER’S GUIDE 2471

• Pressing E and B at the same time returns to OFF(no reference

altitude)

, so the watch performs air pressure to altitude conversions

based on preset data only.

3. Press A to exit the setting screen.

About the Altitude Alarm

The altitude alarm sounds for about five seconds when the current altitude

matches a preset value during an altitude measurement operation. You can

press any button to stop the alarm after it starts to sound.

The altitude alarm sounds only while the Altimeter Mode’s Altitude Screen is

on the display. It does not sound while the watch is in another mode or while

another Altimeter Mode screen is on the display.

Example

If you set the altitude alarm at 130 meters, it sounds when you pass the 130-

meter mark on your way up and on your way back down.

To set the altitude alarm

1. In the Altimeter Mode, hold down A until the

display clears. After four or five seconds,

either

OFF or the current reference altitude

value (if set) starts to flash, which indicates

the setting screen.

2. Press D once to move the flashing to the

altitude alarm setting.

• Press D to move the flashing in the

sequence shown below.

Altitude

Alarm

Long/Short

Mode Setting

Altitude

Unit

Reference

Altitude

3. Press E (+) or B (–) to change the current

altitude alarm value by 5 meters (or 20 feet).

• You can set the altitude alarm value within

the range of –10,000 to 10,000 meters

(–32,800 to 32,800 feet).

Altitude alarm value

• Pressing E and B at the same time resets the altitude alarm value to O.

4. Press A to exit the setting screen.

To turn the altitude alarm on and off

1. In the Altimeter Mode, hold down A until the

display clears. After four or five seconds,

either

OFF or the current reference altitude

value (if set) starts to flash, which indicates

the setting screen.

2. Press D once to move the flashing to the

altitude alarm setting.

3. Press C to toggle the altitude alarm on (

ON)

and off (

OFF).

4. Press A to exit the setting screen.

• An altitude alarm on indicator appears on the

Altimeter Mode’s Altitude Screen while the

altitude alarm is turned on. This indicator does

not appear on any other screen or in any other

mode.

Altitude alarm on indicator

Current On/Off status

Data Recall

Use the Data Recall Mode to view memory measurement data.

To view memory measurement data

1. Enter the Data Recall Mode.

2. Press E to cycle through the various data screens in the sequence

shown below.

• To view the cumulative total ascent value, press C.

• If an error occurs during memory measurement, the xxxxx is shown for

the relative altitude in the Data Recall Mode.

Altitude

Recording date

(Year, Month – Day)

▲

Alternates at

1-second intervals.

Recording time (Hour : Minutes)

▲

Press E.

▲

Start Time Data

Measurement

Data

End Time

Data

▲

Press

▲

Measurement Time

Relative Altitude

▲

Total AscentMaximum Altitude

▲

Cumulative

Total Ascent

Alarm

After you set (and turn on) the daily alarm, the

alarm tone sounds when the alarm time is

reached. You can also turn on an Hourly Time

Signal that causes the watch to beep for about

one second every hour on the hour.

• All of the operations in this section are

performed in the Alarm Mode, which you enter

by pressing D.

Alarm time (Hour : Minutes)

Alarm on indicator

Timekeeping Mode time

Hourly time signal on

indicator

To set the alarm time

1. In the Alarm Mode, hold down A until the

hour setting of the alarm time starts to flash,

which indicates the setting screen.

• This automatically turns on the alarm.

2. Press D to move the flashing between the

hour and minute settings.

3. While a setting is flashing, use E to increase it.

• When setting the alarm time using the 12-hour format, take care to set

the time correctly as a.m. (no indicator) or p.m. (P indicator).

4. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds (in all modes), or

until you stop it by pressing any button.

To test the alarm

In the Alarm Mode, hold down E to sound the alarm.

To turn the daily alarm and the Hourly Time Signal on and off

In the Alarm Mode, press E to cycle through the settings shown below.

• The alarm on indicator and the Hourly Time Signal on indicator are shown

on the display in all modes while these functions are turned on.

Alarm On

Signal On

Alarm Off

Signal Off

Alarm On

Signal Off

Alarm Off

Signal On

Alarm On Indicator / Hourly Time Signal On Indicator

Backlight

The backlight uses an EL (electro-luminescent)

panel that causes the entire display to glow for

easy reading in the dark. The watch’s auto light

switch automatically turns on the backlight when

you angle the watch towards your face.

• The auto light switch must be turned on

(indicated by the auto light switch on indicator)

for it to operate.

• See “Backlight Precautions” for other important

information about using the backlight.

Auto light switch on

indicator

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 2471 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2471

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info