Operation Guide 2582 2586
1
About This
•Button operations are indicated using the letters shown
in the illustration.
•Each section of this manual provides you with the
information you need to perf
mode.
found in the
(Light)
Date Alert ModeAlarm Mode
▲
▲
Stopwatch Mode
▲
General Guide
•Press C to change from mode to mode.
•In any mode, press L to illuminate the displa
Timekeeping Mode
▲
Time Zone Mode
▲
Press C.
Timekeeping
This watch automatically adjusts its time setting in accordance with the time
calibration signal (Call Sign:
also perform a manual procedure to set the time and date, when necessary
Important!
•Before using the w
“T
procedure under “T
•Time calibration reception is limited to specific geographic areas in
Setting the
There are three different methods you can use to set the w
•Auto receiv
•Manual receive of the time calibration signal
•Manual setting without using the time calibration signal
No matter which method you use, y
Specifying Y Zone
Use the Time Zone Mode to specify y
time zone either inside or outside of the W
setting and the watch adjusts its current time and date settings accordingly
•See the “Time Zone
T
1. Use C to enter the
2. Hold down B until the current time zone diff
value starts to flash, which indicates the setting screen.
•The time zone diff
of hours difference in time between the currently
selected time zone and UTC (Universal
Coordinated) in Greenwich, England.
Time zone differential value
3. Use A (+) and D (–) to change the time zone differential value
4. Press B to exit the setting screen.
•If you are in an area that corresponds to the German time zone (1h ) but does not
follow summer time (Da
west of the German zone.
diff0h instead of 1h in order to cancel the effect of summer time (DST).
Time Calibration Signal Reception
Removing the watch from y
below helps to optimize signal reception.
•If your w
place the watch on a stable surf
Note
See “Time Calibration Signal Reception Precautions”
time calibration signal reception.
Resin band Metal band
Pass through band loop
T
1. Use C to enter the
2. Place the watch on a stable surf
o’clock side) is f
Mainflingen, Germany
•This puts the watch in the optimum position f
calibration signal reception.
3. Hold down D f
indicator starts to flash, which indicates that signal
reception has started.
•Signal reception takes from two to five min
the watch during this time.
•The receive indicator stops flashing and remains on the displa
reception is complete.
after a successful signal reception.
reception is unsuccessful for some reason.
Receive indicator
•If the receive indicator does not appear when you hold down D, it means that
signal receive is turned off.
and off
•TD f
Switching between Standard
The time calibration signal sent from Mainflingen includes standard time and summer
time information.
time and standard time on the same days as Germany
manual adjustments.
When you are in an area that does not correspond to German summer time and
standard time, y
Saving
•Note that not all countries or local areas use summer time.
•If the watch receives a time calibration signal in an area that corresponds to the
German time zone, the time is adjusted in accordance with the time calibration
signal data.
German time zone but does not follow summer time
under “T
zone where you are located.
T
1. Use C to enter the
•Note that you cannot switch manually betw
standard time and summer time while the time zone
differential setting is 0h, 1h , or 2h , and signal receiv
is turned on. In this case, the DST On/Off setting does
not appear in step 3 below
receive off before s
and summer time while the time zone differential
setting is 0h, 1h , or 2h.
2. Hold down B until the current time zone diff
value starts to flash, which indicates the setting screen.
3. Press C twice to display the DST On/Off setting screen.
• Each press of C mov
settings.
DST On/Off
Time Zone
Differential Signal Receiv
On/Off
4. Press A or D to toggle between standard time (oFF) and summer time ( on ).
•The DST indicator is on the display while summer time is turned on.
5. Press B to exit the setting screen.
•The summer time setting affects all time zones
•The summer time setting does not affect UTC
Calibration Signal A
This watch is designed so that timek
number of successful signal receptions the watch is ab
control).
when you are within range of the Mainflingen transmitter
•Auto receiv
Timekeeping Mode time shown on the w
from your wrist and put it in a location where it can easily receive the signal prior to
2:00AM German time.
•The auto receive operation is perf
in.
•This watch is shipped from the factory with auto receive turned on.
the auto receive setting using the procedure under
off
T
1. Use C to enter the
2. Hold down B until the current time zone diff
value starts to flash, which indicates the setting screen.
3. Press C once to displa
setting screen.
4. Press A or D to toggle betw
and manual) on (on ) and off ( oFF ).
5. Press B to e
•If you use the above procedure to turn on signal receiv
the watch performs a signal receive oper
by the flashing icon) when you e
step 5.
•T
Timekeeping Mode and then hold down D f
three seconds.
MO0306-EB
