Operation Guide 2607 2637 2687
3
Time Recorder
The
current time (month, day
DST on/off setting) with the touch of a button.
you can use the
and the end time of a particular event.
T
In the B to record the
Home City time (month, day
DST on/off setting).
• The recorded time flashes f
then it is assigned a record number
Timekeeping Mode screen appears.
• Records are assigned numbers sequentially from
#01
through #30 .
• Storing a new time record when there are already 30
records stored in memory automatically deletes record
#01, shifts the remaining records upwards by 1, and
stores the new record as
#30.
Time record number
Recorded date
(Mouth – Day)
Recorded time
(Hour : Minutes Seconds)
T
In the D (+) and B ( – ) to scroll through times stored in
memory
• If you recorded a new
Mode, the new
record you were vie
T
In the A to delete all
Alarms
The Alarm Mode gives you a choice of four one-time
alarms and one snooze alar
Also use the Alarm Mode to tur
(
SIG) on and off.
• There are five alarms numbered
AL1 through AL4,
and
SNZ.SNZ as a snooze alarm
only
AL1 through AL4 can be used as one-
time alarms only
• Alarm settings (and Hourly Time Signal settings) are
av
pressing C .
Alarm time (Hour : Minutes)
Alarm number
Home city time
T
1. In the Alarm Mode, use D to scroll through the alarm
screens until the one whose time you want to set is
display
2. After you select an alarm, hold down A until the hour
setting of the alarm time star
the setting screen.
• This operation automatically turns on the alarm.
3. Use C to move the flashing betw
minute settings.
4. While a setting is flashing, use D (+) and B ( –) to
change it.
5. Press A to exit the setting screen.
• When setting the alarm time using the 12-hour format,
take care to set the time correctly as a.m.A indicator)
or p.m.P indicator).
AL1 AL2 AL3
SIG SNZ AL4
Alarm Operation
The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
watch is in.
of sev
• Pressing any b
• P
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen
Displaying the snooze alarm setting screen
T
In the Alarm Mode, hold down B to sound the alarm.
T
1. In the Alarm Mode, use D to select an alarm.
2. Press B to toggle it on and off.
• T
AL1, AL2, AL3,
AL4) displays the alarm on indicator on its Alarm
Mode screen.
SNZ)
displays the alarm on indicator and snooze alarm
indicator on its Alarm Mode screen.
• In all modes, the alarm on indicator is shown for an
alarm that is currently turned on.
alarm is on, the snooze alarm indicator is displayed in all
modes.
• The alarm on indicator flashes while the alarm is
sounding.
• The snooze alarm indicator flashes during the 5-minute
intervals between alarms.
Alarm on indicator
Module 2637
Snooze on indicator
Module 2607
Module 2687
Alarm on indicator
T
1. In the Alarm Mode, use D to select the Hourly Time
Signal (
SIG
).
2. Press B to toggle it on (Hourly
indicator display
indicator not displa
• The Hour
modes when the Hourly
Hourly time signal
on indicator
Module 2607
Module 2637
Module 2687
Stopwatch
The stopwatch lets you measure elapsed time
and two finishes.
• The display range of the stopwatch is 23 hours, 59
minutes, 59.99 seconds
• The stopwatch continues to run, restar
after it reaches its limit, until you stop it.
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
• The stopwatch measurement operation continues even
if you exit the Stopw
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter bC.
1/100 second
Hours
Home city time
Seconds
D
Start Stop
Elapsed Time
➤
Re-start Clear
D ➤
Stop
D
➤
D
➤
B
Split Time
D
Start Split
➤
Split release
Clear
B
➤
Stop
B
➤
D ➤
B
Tw
D
Start Split
➤
Stop
Clear
B
➤
Split release
D ➤
B
➤
B
First runner
finishes.
Display time of
first runner.
Second runner
finishes.
Display time of
second runner.
T
(SPL/
SPL
display
Backlight
The backlight uses an EL (electro-luminescent) panel that
causes the entire display to glo
dark. The watch’s auto light s
the backlight when y
in the dark.
• The auto light switch must be turned on (indicated by
the auto light switch on indicator) f
• See “Backlight Precautions ” f
information about using the backlight.
T
In any mode, press L to illuminate the displa
one second.
• The above operation turns on the backlight regardless of
the current auto light switch setting.
Auto light switch on indicator
Module 2607
Module 2637
Module 2687
About the Auto Light Switc
T
whenev
watch f“ Full Auto EL Light,” so the auto light switch operates only when
av
light.
Moving the watch to a position that is par
towards you more than 40 deg
More than
40
°
Parallel to
ground
W
• Always make sure you are in a safe place whenever y
display of the watch using the auto light s
running or engaged in any other activity that can result in accident or injury
Also take care that sudden illumination by the auto light s
surprise or distract others around y
• When you are wearing the watch, make sure that its auto light switc
off before riding on a bicyc
vehicle. Sud
distraction, whic
