Bedienungsanleitung Casio 2747 (Seite 1 von 3) (Englisch)

445416

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

USER’S GUIDE 2747

MA0303-A

About This Manual

∑ Button operations are indicated using the letters shown

in the illustration.

∑ Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

General Guide

∑ Press C to change from mode to mode. After you perform an operation (except for

B) in any mode, pressing C returns to the Timekeeping Mode.

∑ In any mode, press B to illuminate the display.

Timekeeping

This watch features separate digital and analog timekeeping. The procedures for

setting the digital time and analog time are different.

∑ In the Timekeeping Mode, press A to toggle the display between the date screen

and the time screen.

Date Screen Time Screen

Day of week

Month – Day

Hour : Minutes

PM indicator

Minute hand

Hour hand

Seconds

Digital Time and Date

Use the Timekeeping Mode to set and view a digital display of the current time and

date. When setting the digital time, you can also configure settings for summer time

(Daylight Saving time or DST).

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select the other settings.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping (indicated

by A or P on the display), or 24-hour timekeeping.

∑ With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range

of midnight to 11:59 a.m.

∑ With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

∑ The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

Digital Time Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time

(

ON displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

∑ The DST indicator appears on the Timekeeping, Alarm,

and Hand Setting Mode to indicate that Daylight Saving

Time is turned on.

Setting the Analog Time

Perform the procedure below when the time indicated by the analog hands does not

match the time of the digital display.

To adjust the analog time

1. In the Timekeeping Mode, press C six times to enter

the Hand Setting Mode.

2. Hold down A until the current digital time starts to

flash, which indicates the analog setting screen.

3. Press D to advance the analog time setting by

20 seconds.

∑ Holding down D advances the analog time setting at

high speed.

Press C.

Timekeeping Mode Telememo Mode World Time Mode

Alarm Mode Countdown Timer

Mode

Stopwatch Mode Hand Setting Mode

Press A.

DST

Seconds

Day

Hour

Year

Month

Minutes

3. When the setting you want to change is flashing, use B and D to change it as

described below.

Screen

OFF

10:08

CAAD

6-30

To do this:

Reset the seconds to AA.

Toggle between Daylight Saving Time (ON)

and Standard Time (OFF).

Change the hour or minutes.

Change the year.

Change the month or day.

Do this:

Press D.

Use D (+) and B (–).

4. Press A to exit the setting screen.

∑ Resetting the seconds only (without changing the hour, minute, or DST setting)

causes the analog minute hand setting to be adjusted automatically. If you change

the hour, minute, or DST setting, you should also use the procedure under “To

adjust the analog time” to adjust the analog hands accordingly.

∑ See “Digital Time Daylight Saving Time (DST) Setting” for details about the DST

setting.

∑ Resetting the seconds to

AA while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to

AA without changing the minutes.

∑ The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

∑ The year can be set in the range of 2000 to 2099.

∑ The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

∑ If you need to advance the analog time a long way, press D and B at the same

time. This locks the high speed hand movement, so you can release the two

buttons. High-speed hand movement continues until you press any button. It will

also stop automatically after the time advances 12 hours or if an alarm (daily

alarm, Hourly Time Signal, or countdown alarm) starts to sound.

4. Press A to exit the setting screen.

∑ To return to the Timekeeping Mode, press C.

Casio 2747 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info