USER’S GUIDE 2747
2
To create a new Telememo record
1. In the TB and D at the same
time to display the new data screen.
∑ The new data screen shows
___
, which indicates
that there is no text in the name field.
∑ If the new data screen does not appear
memory is full. T
have to delete some of the records stored in memory
2. Hold down A until the flashing cursor (_ ) appears in
the name field of the display
screen.
3. Use D and B to change the character at the cursor
position in the name field. The character changes in the
following sequence.
(space)
to to to
Press .
Press .
∑ Y
details, see the “Character List”.
4. When the character you want is at the cursor position, press C to move the cursor
to the right.
5. Repeat steps 3 and 4 until the name is complete.
∑ Y
6. After you input the name, press C as many times as
necessary to move the cursor to the number field.
∑ Y
the long cursor (_). The number field has a short
cursor (_).
Name
Record number
Remaining memory
Number
Telememo
T
containing name and telephone number data. Records
are automatically sorted based on the characters of the
name. Y
the display
∑ A Telememo Mode record has a name field and a
number field.
∑ See “Character List” for details on how the watch sorts
records.
∑ All of the operations in this section are performed in the
Telememo Mode, which you enter by pressing C.
New Data Screen
∑ The name field has spaces for eight characters, so you must press C to move
the past the 8th character in order to get to the number field.
∑ The number field has spaces for 16 digits. Pressing C until the cursor moves
past the 16th digit causes it to jump back to the first character of the name field.
7. Use D and B to change the character at the cursor position in the number field.
The character changes in the following sequence.
(space)
to
Press .
Press .
8. When the character you want is at the cursor position, press C to move the cursor
to the right.
9. Repeat steps 7 and 8 until you complete number input.
∑ Y
10. Press A to store your data and return to the T
the cursor).
∑ After you press A to store data, the name flashes for about one second to indicate
that records are being sorted.
∑ Note that a record must have something input in the name field, otherwise you will
not be able to store it.
To recall Telememo records
In the TD (+) to scroll through T
display
∑ Only name data appears when you scroll through T
∑ Press A to toggle the screen between the name and number fields.
Name Number
∑ The name and number scroll from right to left on the display< ) is
inserted between the last character and first character of the data.
∑ Pressing D while the last T
screen to appear
To edit a Telememo record
1. In the TD to scroll through the records and display the one
you want to edit.
2. Hold down A until the flashing cursor appears on the display
3. Use C to move the flashing to the character you want to change.
4. Use B and D to change the character
∑ For details on inputting characters, see “T
3 for name input and 7 for number input).
5. After making the changes that you want, press A to store them and return to the
T
To delete a Telememo record
1. In the TD to scroll through the records and display the one
you want to delete.
2. Hold down A until the flashing cursor appears on the display
3. Press B and D at the same time to delete the record.
∑
CLR appears to indicate that the record is being deleted.
deleted, the cursor appears on the display
4. Input data or press A to return to the T
Press A .
World Time
World T
(29 time zones) around the world.
∑ All of the operations in this section are performed in the
World TC .
World Time
The time settings of the Timekeeping Mode and the W
Time Mode are independent of each other
make separate settings for each. This watch is preset with
a number of city codes, each of which represents the time
zone where that city is located.
∑ Whenever you change the time setting for any city in the World T
settings of all other cities are changed accordingly
∑ If your location is not included in the preset city codes, select the preset city code
that is in the same time zone as your location.
∑ For full information on city codes, see the “City Code T
To set the World Time
1. In the World TD to scroll through city
codes.
2. Hold down A until the DST On/Off setting of the world
time starts to flash, which indicates the setting screen.
3. Press C to move the flashing in the sequence shown
below to select the other settings.
DST
Minutes
Hour
4. While a setting is flashing, use D and B to change it.
∑ Pressing D and B at the same time while any World T
causes the displayed time to change to the same setting as the current
Timekeeping Mode time.
∑ While DST On/Off setting is selected (flashing), press D to toggle between
Daylight Saving T
ON) and Standard TOFF ).
∑ While the hour or minutes setting is selected (flashing), use D (+) and B (–) to
change it.
5. Press A to exit the setting screen.
To view the time in another city code
In the World TD to scroll through city codes.
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World TD to display the city code
whose Standard Time/Daylight Saving
want to change.
2. Hold down A until the DST On/Off setting of the world
time starts to flash, which indicates the setting screen.
3. Press D to toggle between Daylight Saving Time (
ON
displayed) and Standard Time (OFF displayed).
4. Press A to exit the setting screen.
∑ The DST indicator appears on the World
Saving T
∑ The above operation toggles all World T
Time and Standard
codes.
Alarms
You can set three independent Daily
alarm is turned on, the alarm tone sounds when the alarm
time is reached. One of the alarms is a snooze alarm,
while the other two are one-time alarms.
Y
watch to beep twice every hour on the hour
∑ There are four screens in the
one-time alarms (indicated by numbers
AL1and
AL2), one is for a snooze alarm (indicated by SNZ),
and one is for the Hourly T
SIG).
∑ All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing C.
To set an alarm time
1. In the D to scroll through the alarm
screens until the one whose time you want to set is
displayed.
City code
Current time for the
selected city code
AM indicator
Alarm time
(Hour : Minutes)
∑ To set a one-time alarm, display one of the screens indicated by an alarm number
AL1or AL2. TSNZ.
∑ The snooze alarm repeats every five minutes.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
∑ This operation automatically turns on the alarm.
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (–) to change it.
∑ When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (A indicator) or p.m. (P indicator).
5. Press A to exit the setting screen.
