Bedienungsanleitung Casio 2993 (Seite 1 von 4) (Englisch)

522097

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

Operation Guide 2993

MA0604-EB

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

(Light)

Hour : Minutes

Day of week

PM indicator

Seconds

Month – Day

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Read This Before You Set the Time and Date !

The times displayed in the Timekeeping Mode and World

Time Mode are linked. Because of this, make sure you

select a city code for your Home City (the city where you

normally use the watch) before you set the time and date.

• For full information on city codes, see the “City Code

Table”.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds City Code

Hour

Year MinutesDay

DST

Month

3. When the setting you want to change is flashing, use D and B to change it as

described below.

DST indicator

Screen

OFF

10:58

6-30

To do this:

Reset the seconds to

Toggle between Daylight Saving Time (

)

and Standard Time (

OFF

)

Change the city code

Change the hour or minutes

Change the year

Change the month or day

Do this:

Press D.

Use D (east) and B (west).

Use D (+) and B (–).

• See “Daylight Saving Time (DST)” for details about the DST setting.

4. Press A to exit the setting screen.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time

(

displayed) and Standard Time (

OFF

displayed).

4. Press A to exit the setting screen.

• The DST indicator is on the display while Daylight

Saving Time is turned on.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears for times in the range of noon

to 11:59 p.m. and no indicator appears to the left of the hour digits for times in the

range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

• The P indicator is not displayed with the Timekeeping Mode time on the Preset

Timer Mode, Countdown Timer Mode, World Time Mode, and Alarm Mode screens.

Timekeepin

Mode time

Initial Stopwatch Mode

Screen

Timekeeping Mode Stopwatch Mode Preset Timer Mode Alarm ModeWorld Time ModeCountdown Timer Mode

Press .

General Guide

• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

Stopwatch

The stopwatch lets you measure elapsed time. The upper

display and lower display can be used for official timing of

an event or game.

• You can configure the watch for beeper alert or vibration

alert. For details about vibration alert, see “Vibration

Alert”.

• The measurement range of the upper display is

59 minutes 59 seconds.

• The measurement range of the lower display is

99 minutes 59 seconds.

• The stopwatch continues to run, restarting from zero

after it reaches its limit, until you stop it.

• The stopwatch measurement operation continues even

if you exit the Stopwatch Mode.

• All of the operations in this section are performed in the

Stopwatch Mode, which you enter by pressing C.

Minutes Seconds

•

Press B to pause and

restart elapsed time

measurement.

Minutes Seconds

•

This time measurement cannot be

paused.

It shows the total elapsed time

since the timing operation started.

Elapsed Time Screen

•

This time measurement (1/100

second) cannot be paused.

To measure times with the stopwatch

Elapsed Time

Start

Stop*

Re-start

Hold down

Stop*

Clear

*1 Elapsed time measurement in the lower display continues.

Using the Watch for Official Timing of a Sport Event

After you set a game or event time, the watch will perform an alert operation (beeper

or vibration) when the time in the lower display reaches that time.

If the event is interrupted for some reason, you can press B to pause and restart

timing in the upper display. The lower display shows the total elapsed time since the

start of the timing operation. You can calculate the total amount of time that play was

interrupted (lost time or injury time) by subtracting the upper display time from the

lower display time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 2993 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 2993

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info