Bedienungsanleitung Casio 3100 (Seite 1 von 3) (Englisch, Holländisch)

522101

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Operation Guide 3100

MA0801-EA

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background or

light figures on a dark background. All sample displays

in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

(Light)

Timekeeping Mode Stopwatch Mode Preset Timer Mode Alarm ModeWorld Time ModeCountdown Timer Mode

Press .

General Guide

• Press B to change from mode to mode.

• In any mode (except when a setting screen is on the display), press L to illuminate

the display.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press B to move the flashing in the sequence shown

below to select other settings.

Seconds City Code

Hour

Year MinutesDay

DST

Month

3. When the setting you want to change is flashing, use D and C to change it as

described below.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Read This Before You Set the Time and Date !

The times displayed in the Timekeeping Mode and World

Time Mode are linked. Because of this, make sure you

select a Home City code before you set the time and date.

PM indicator

Hour : Minutes : Seconds

Month – Day Day of week

Screen

OFF

6-30

To do this:

Reset the seconds to

Toggle between Daylight Saving Time (

)

and Standard Time (

OFF

)

Change the city code

Change the hour or minutes

Change the year

Change the month or day

Do this:

Press D.

Use D (east) and C (west).

Use D (+) and C (–).

• For details about city codes, see the “City Code Table”.

• See “Daylight Saving Time (DST)” for details about DST setting.

4. Press A to exit the setting screen.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press B to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time

(

displayed) and Standard Time (

OFF

displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

DST indicator

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range

of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

• The A and P indicators are not displayed when the current time is displayed in other

modes.

Stopwatch

The Stopwatch Mode lets you time a game or event. The

upper display shows non-stop total elapsed time, while

the lower display shows event elapsed time, which can be

paused as required for time outs, half time, etc.

• The measurement limit of the upper display (total time)

is 99 minutes 59 seconds.

• The measurement limit of the lower display (event time)

is 59 minutes 59 seconds.

• A stopwatch measurement operation continues to run

until you stop it. If either time reaches its measurement

limit, it will restart from zero.

• A stopwatch measurement operation continues even if

you exit the Stopwatch Mode.

• Starting event timing will cause the display to change to

the Elapsed Time Screen from the initial screen shown

on this page.

• All of the operations in this section are performed in the Stopwatch Mode, which you

enter by pressing B.

Event time minutes, seconds

* The time measurement in this

display can be paused and

restarted by pressing .

Total time minutes, seconds,

1/100 second

* Once started, this time

measurement cannot be

paused. It shows total time

since the stopwatch

measurement operation

started.

Elapsed Time Screen

Basic Event Timing Operation

Start

Stop* Re-start Stop* Clear

Hold down

* Total time measurement in upper display continues.

Using the Stopwatch Mode to Time a Sporting Event

You can time a sporting event with the Stopwatch Mode either with or without

presetting the duration of the event. If you do, the watch will beep when the total time

in the upper display reaches the preset event duration.

If the event is interrupted for timeouts or some other reason, press D to pause and

restart event time measurement in the lower display. Since total time measurement

continues in the upper display, you can calculate the time that play was interrupted

(lost time) by subtracting the time in the lower display from the time in the upper

display.

Current

Timekeeping Mode time

Casio 3100 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info