Bedienungsanleitung Casio 3100 (Seite 3 von 3) (Englisch, Holländisch)

522101

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Operation Guide 3100

To toggle a city code time between Standard Time and Daylight Saving Time

1. In the World Time Mode, use D and C to display the

city code whose Standard Time/Daylight Saving Time

setting you want to change.

2. Hold down A for about one second to toggle Daylight

Saving Time (DST displayed) and Standard Time (DST

not displayed).

• The DST indicator appears on the display whenever you

display a city code for which Daylight Saving Time is

turned on.

• Note that the DST/Standard Time setting affects only the

currently displayed city code. Other city codes are not

affected.

DST indicator

Alarm

When the Daily Alarm is turned on, the alarm sounds for

10 seconds at the preset time each day. When the Hourly

Time Signal is turned on, the watch beeps every hour on

the hour.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing B.

To set the alarm time

1. Hold down A while in the Alarm Mode until the hour

digits start to flash on the display. The hour digits flash

because they are selected.

• This operation turns on the alarm automatically.

Current time

Alarm on indicator

Hourly time signal

on indicator

Alarm time

(Hour : Minutes)

2. Press B to change the selection in the following sequence.

Hour Minutes

3. While a setting is flashing, use D and C to change it as described below.

4. After you set the alarm time, press A to return to the Alarm Mode.

To stop the alarm

Press any button to stop the alarm after it starts to sound.

To switch the Daily Alarm and Hourly Time Signal on and off

Press D while in the Alarm Mode to change the status of the Daily Alarm and Hourly

Time Signal in the following sequence.

Hourly Time

Signal only

Daily Alarm

only

Both offBoth on

To test the alarm

Hold down D while in the Alarm Mode to sound the alarm.

Screen

12:00

To do this:

Change the hour and minutes

Do this:

Use D (+) and C (–).

• With the 12-hour format, set the time

correctly as a.m. (A indicator) or p.m.

(P indicator).

Reference

This section contains more detailed and technical information about watch operation.

It also contains important precautions and notes about the various features and

functions of this watch.

Button Operation Tone

The button operation tone sounds any time you press one

of the watch’s buttons. You can turn the button operation

tone on or off as desired.

• Even if you turn off the button operation tone, the

alarms, the Hourly Time Signal, the countdown alarm,

and the event timer alarm all operate normally.

To toggle the button operation tone on and off

In any mode (except when a setting screen is on the

display), hold down B to toggle the button operation tone

on (

not displayed) and off ( displayed).

• Holding down B to toggle the button operation tone on or off also causes the

watch’s current mode to change.

•

is displayed in all modes when the button operation tone is turned off.

Scrolling

The C and D buttons are used in various modes and setting screens to scroll

through data on the display. In most cases, holding down these buttons during a scroll

operation scrolls at high speed. This is true except when the countdown timer number

is flashing on the Countdown Timer Mode screen.

Auto Return Features

• If you leave the watch in the Alarm Mode for two or three minutes without performing

any operation, it changes to the Timekeeping Mode automatically.

• If you leave a screen with flashing digits on the display for two or three minutes

without performing any operation, the watch exits the setting screen automatically.

Timekeeping

• Resetting the seconds to

while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to

without changing the minutes.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s battery replaced.

World Time

• The seconds count of the World Time is synchronized with the seconds count of the

Timekeeping Mode.

• All World Time Mode times are calculated from the current Home City time in the

Timekeeping Mode using UTC time differential values.

• The UTC differential is a value that indicates the time difference between a

reference point in Greenwich, England and the time zone where a city is located.

• The letters “UTC” is the abbreviation for “Universal Time Coordinated”, which is the

world-wide scientific standard of timekeeping. It is based upon carefully maintained

atomic (cesium) clocks that keep time accurately to within microseconds. Leap

seconds are added or subtracted as necessary to keep UTC in sync with the Earth’s

rotation.

Illumination Precautions

An LED (light-emitting diode) illuminates the display for easy reading in the dark. In

any mode (except when a setting screen is on the display), press L to turn on

illumination for about two seconds.

• Illumination may be hard to see when viewed under direct sunlight.

• Illumination turns off automatically whenever an alarm sounds.

• Frequent use of illumination runs down the battery.

City

UTC

Other major cities in same time zone

Code Differential

Pago Pago

Honolulu

Anchorage

Vancouver

San Francisco

Los Angeles

Denver

Mexico City

Chicago

Miami

New York

Caracas

St. Johns

Rio De Janeiro

Praia

Lisbon

London

Barcelona

Paris

Milan

Rome

Berlin

Athens

Johannesburg

Istanbul

Cairo

Jerusalem

Moscow

Jeddah

Tehran

Dubai

Kabul

Karachi

Male

Delhi

Dhaka

Yangon

Bangkok

Singapore

Hong Kong

Beijing

Seoul

Tokyo

Adelaide

Guam

Sydney

Noumea

Wellington

–11.0

–10.0

–09.0

–08.0

–07.0

–06.0

–05.0

–04.0

–03.5

–03.0

–01.0

+00.0

+01.0

+02.0

+03.0

+03.5

+04.0

+04.5

+05.0

+05.5

+06.0

+06.5

+07.0

+08.0

+09.0

+09.5

+10.0

+11.0

+12.0

Papeete

Nome

Las Vegas, Seattle/Tacoma, Dawson City

El Paso, Edmonton

Winnipeg, Houston, Dallas/Fort Worth, New Orleans

Montreal, Detroit, Boston, Panama City, Havana, Lima,

Bogota

La Paz, Santiago, Port Of Spain

Sao Paulo, Buenos Aires, Brasilia, Montevideo

Dublin, Casablanca, Dakar, Abidjan

Amsterdam, Algiers, Hamburg, Frankfurt, Vienna,

Stockholm, Madrid

Helsinki, Beirut, Damascus, Cape Town

Kuwait, Riyadh, Aden, Addis Ababa, Nairobi

Shiraz

Abu Dhabi, Muscat

Mumbai, Kolkata, Colombo

Jakarta, Phnom Penh, Hanoi, Vientiane

Kuala Lumpur, Taipei, Manila, Perth, Ulaanbaatar

Pyongyang

Darwin

Melbourne, Rabaul

Port Vila

Christchurch, Nadi, Nauru Island

PPG

HNL

ANC

YVR

SFO

LAX

DEN

MEX

CHI

MIA

NYC

CCS

YYT

RIO

RAI

LIS

LON

BCN

PAR

MIL

ROM

BER

ATH

JNB

IST

CAI

JRS

MOW

JED

THR

DXB

KBL

KHI

MLE

DEL

DAC

RGN

BKK

SIN

HKG

BJS

SEL

TYO

ADL

GUM

SYD

NOU

WLG

City Code Table

*Based on data as of December 2006.

Casio 3100 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info