Bedienungsanleitung Casio 3149 (Seite 1 von 2) (Englisch)

649157

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

Operation Guide 3149

4. While a setting is flashing, press D to increase it.

• To set an alarm that does not include a month (Daily alarm, Monthly alarm),

set

for the month. Press D until the

mark appears (between 12 and 1) while

month setting is flashing.

• To set an alarm that does not include a day (Daily alarm, 1-Month alarm),

set

for the day. Press D until the

mark appears (between the end of the

month and 1) while the day setting is flashing.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. or p.m. (P indicator).

5. Press A to exit the setting screen.

Alarm Operation

The alarm sounds at the preset time for about 10 seconds. In the case of the snooze

alarm, the alarm operation is performed a total of seven times, every five minutes, or

until you turn the alarm off or change it to a one-time alarm.

Note

• Pressing any button stops the alarm tone operation.

• Performing any one of the following operations during a 5-minute interval between

snooze alarms cancels the current snooze alarm operation.

Displaying the Timekeeping Mode setting screen

Displaying the Alarm

setting screen

To test the alarm

In the Alarm Mode, hold down D to sound the alarm.

To turn Alarms

through

on and off

1. In the Alarm Mode, use D to select a one-time alarm

(alarm number

through

2. Press A to toggle the displayed alarm on and off.

• Turning on a one-time alarm (

through

) displays the

one-time alarm on indicator on its screen.

• The one-time alarm on indicator is displayed in all

modes.

• If any alarm is on, the one-time alarm on indicator is

shown on the display in all modes.

To select the operation of Alarm

1. In the Alarm Mode, use D to select Alarm

2. Press A to cycle through the available settings in the sequence shown below.

Snooze alarm on indicator and one-time alarm on indicator

One-time alarm on Alarm offSnooze alarm on

• The applicable indicator is displayed in all modes when an alarm is turned on.

• The snooze alarm on indicator flashes during the 5-minute intervals between

alarms.

• Displaying the Alarm

setting screen while the snooze alarm is turned on turns off

the snooze alarm automatically (making Alarm

a one-time alarm).

To set an alarm time

1. In the Alarm Mode, use D to scroll through the alarm

screens until the one whose time you want to set is

displayed.

• You can configure Alarm

as a snooze alarm or a one-time alarm. Alarms

through

can be used as one-time alarms only.

• The snooze alarm repeats every five minutes.

2. After you select an alarm, hold down A until the hour setting of the alarm time

starts to flash. This indicates the setting screen.

3. Press C to move the flashing in the sequence shown

below to select other settings.

Hour Minutes

Month Day

Alarms

You can set five independent Daily Alarms. When an

alarm is turned on, the alarm tone sounds when the alarm

time is reached. One of the alarms can be configured as a

snooze alarm or a one-time alarm, while the other four are

one-time alarms.

You also can turn on an hourly time signal that causes the

watch to beep twice every hour on the hour.

• There are five alarm screens numbered

through

The hourly time signal screen is indicated by

:00

• When you enter the Alarm Mode, the screen you were

viewing when you last exited the mode appears first.

• All of the operations in this section are performed in the

Alarm Mode, which you enter by pressing C.

Alarm Types

The alarm type is determined by the settings you make, as described below.

• Daily alarm

Set the hour and minutes for the alarm time. This type of setting causes the alarm to

sound everyday at the time you set.

• Date alarm

Set the month, day, hour and minutes for the alarm time. This type of setting causes

the alarm to sound at the specific time, on the specific date you set.

• 1-Month alarm

Set the month, hour and minutes for the alarm time. This type of setting causes the

alarm to sound everyday at time you set, only during the month you set.

• Monthly alarm

Set the day, hour and minutes for the alarm time. This type of setting causes the alarm

to sound every month at time you set, on the day you set.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to move the flashing in the sequence shown

below to select other settings.

Seconds Hour

Minutes

Day Month

Year

3. When the setting you want to change is flashing, press D to change it as

described below.

MA0804-EA

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

Timekeeping Mode Alarm Mode Countdown Timer Mode Stopwatch Mode Dual Time Mode

Press .

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

• In any mode, hold down C for about two seconds to return to the Timekeeping

Mode.

Hour : Minutes Seconds

Day of week

PM indicator

Month – Day

To change this setting

Seconds

Hour, Minutes, Year, Month, Day

Perform this button operation

Press D to reset to 00.

Press D to increase the setting.

• Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and

adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.

4. Press A to exit the setting screen.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar automatically makes allowances for

different month lengths and leap years. Once you set the date, there should be no

reason to change it except after you have the watch’s battery replaced.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and

24-hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

Hour : Minutes

One-time alarm on

indicator

Casio 3149 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3149

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info