Bedienungsanleitung Casio 3180 - DW-5600 (Seite 1 von 6) (Englisch)

624521

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Operation Guide 3180

MO0905-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out

of your purchase, be sure to read this manual carefully.

Keep the watch exposed to bright light

The electricity generated by the solar cell of the

watch is stored by a rechargeable battery. Leaving

or using the watch where it is not exposed to light

causes the battery to run down. Make sure the

watch is exposed to light as much as possible.

• When you are not wearing the watch on your

wrist, position the face so it is pointed at a

source of bright light.

• You should try to keep the watch outside of

your sleeve as much as possible. Charging is

reduced significantly if the face is covered only

partially.

Bright Light

Solar cell

All

functions

enabled

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Charge

Rechargeable battery

Bright Light

Electrical

energy

Solar cell

(Converts light to

electrical power.)

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Some or all

functions

disabled

Dis-

charge

Battery charges in the light. Battery discharges in the dark.

• The watch continues to operate, even when it is not exposed to light.

Leaving the watch in the dark can cause the battery to run down, which will

result in some watch functions to be disabled. If the battery goes dead, you

will have to re-configure watch settings after recharging. To ensure normal

watch operation, be sure to keep it exposed to light as much as possible.

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for

any damage or loss suffered by you or any third party arising through the

use of this product or its malfunction.

• The actual level at which some functions are disabled depends on the

watch model.

• Frequent display illumination can run down the battery quickly and require

charging. The following guidelines give an idea of the charging time

required to recover from a single illumination operation.

Approximately 5 minutes exposure to bright sunlight coming in through a

window

Approximately 8 hours exposure to indoor fluorescent lighting

• Be sure to read “Power Supply” for important information you need to

know when exposing the watch to bright light.

If the display of the watch is blank...

If the display of the watch is blank, it means that the watch’s Power Saving

function has turned off the display to conserve power.

• See “Power Saving Function” for more information.

About This Manual

• Depending on the model of your watch, display text appears either as dark

figures on a light background or light figures on a dark background. All

sample displays in this manual are shown using dark figures on a light

background.

• Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to

perform operations in each mode. Further details and technical information

can be found in the “Reference” section.

General Guide

• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

Timekeeping Mode

Press C.

World Time Mode

Countdown Timer Mode

Stopwatch Mode

Alarm Mode

▲

Timekeeping

Press the B button to toggle the upper display

between the day of the week and date, and the

currently selected World Time city and time (Dual

Time).

Use the Timekeeping Mode to set and view the

current time and date.

Current Time

▲

Seconds

indicator

Hour : Minutes

Seconds

Day of week

Month – Day

Dual Time

▲

Dual time

City code

To set the time and date manually

1. In the Timekeeping Mode hold down A until

the city code starts to flash, which indicates

the setting screen.

2. Use D and B to select the city code you

want.

• Make sure you select your Home City code

before changing any other setting.

• For full information on city codes, see the

“UTC Differential/City Code List”.

Read This Before You Set the Time and Date!

This watch is preset with a number of city codes, each of which represents

the time zone where that city is located. When setting the time, it is important

that you first select the correct city code for your Home City (the city where

you normally use the watch). If your location is not included in the preset city

codes, select the preset city code that is in the same time zone as your

location.

• Note that all of the times for the World Time Mode city codes are displayed

in accordance with the time and date settings you configure in the

Timekeeping Mode.

3. Press C to move the flashing in the sequence shown below to select the

other setting.

Seconds

12/24-Hour

Format

Hour

Minutes

DST

Month

Ye a r

City Code

DayPower Saving

Illumination

Duration

Operation

Tone

4. When the timekeeping setting you want to change is flashing, use D or

B to change it as described below.

Specify your Home City

Cycle between Daylight Saving

Time (

ON) and Standard Time

(

OFF).

Use D (east) and B

(west).

Press D.

Screen: To do this: Do this:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 3180 - DW-5600 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3180 - DW-5600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info