Bedienungsanleitung Casio 3194 (Seite 1 von 5) (Englisch)

552994

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 3194

MA0905-EB

Getting Acquainted

Warning!

• The measurement functions built into this watch are not intended for use in

taking measurements that require professional or industrial precision. Values

produced by this watch should be considered as reasonably accurate

representations only.

• The longitude, lunitidal interval, Moon phase indicator and tide graph data that

appear on the display of this watch are not intended for navigation purposes.

Always use proper instruments and resources to obtain data for navigation

purposes.

• This watch is not an instrument for calculating low tide and high tide times. The

tide graph of this watch is intended to provide a reasonable approximation of

tidal movements only.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

Timekeeping Mode World Time ModeAlarm ModeCountdown Timer

Mode

Stopwatch

Mode (ST1)

Tide/Moon Data

Mode

Stopwatch

Mode (ST2)

Press .

Screen

To do this:

Reset the seconds to

Toggle between Daylight Saving

Time ( ) and Standard Time ( )

Specify the UTC offset

Change the hour or minutes

Change the year

Change the month or day

Do this:

Press D.

Use D (+) and B (–).

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press L to illuminate

the display.

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

• The tide graph shows tidal movements for the current

date in accordance with the current time as kept in the

Timekeeping Mode.

• The Moon phase indicator shows the current Moon

phase in accordance with the current date as kept in the

Timekeeping Mode.

Important!

• Be sure to configure the current time and date, and your

Home Site data (data for the site where you use the

watch) correctly before using the functions of this watch.

See “Home Site Data” for more information.

Setting the Time and Date

This watch is preset with UTC offset values that represent each time zone around the

globe. Before setting the time, be sure to set the UTC offset for your Home Site first,

which is the location where you normally will be using the watch.

• Note that World Time Mode times are all displayed based on the time and date

settings you configure in the Timekeeping Mode.

To set the time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

• Be sure to configure the correct UTC offset for your

Home Site before configuring any other Timekeeping

Mode settings.

• See the “City Code Table” for information about the

UTC offset settings that are supported.

2. Press C to move the flashing in the sequence shown below to select other

settings.

Seconds UTC offset

Hour

Year MinutesDay

DST

Month

Home time zone

Day of week

Month – Day

Hour : Minutes

PM indicator

Tide graph

Moon phase indicator

Seconds

3. When the setting you want to change is flashing, use D and B to change it as

described below.

• See “Daylight Saving Time (DST)” for details about DST setting

• The UTC offset setting range is –12.0 to +14.0, in 0.5-hour units.

• When DST is turned on, the UTC offset setting range is –11.0 to +15.0, in

0.5-hour units.

4. Press A twice to exit the setting screen.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from Standard

Time. Remember that not all countries or even local areas use Daylight Saving Time.

To toggle the Timekeeping Mode time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting

screen.

2. Press C to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time

(

displayed) and Standard Time (

displayed).

4. Press A twice to exit the setting screen.

• The DST indicator appears on the Timekeeping, and

Tide/Moon Data screens to indicate that Daylight Saving

Time is turned on. In the case of the Tide/Moon Data

Mode, the DST indicator appears on the Tide Data

screen only.

To toggle between 12-hour and 24-hour timekeeping

In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and 24-

hour timekeeping.

• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all other modes.

• The P indicator is not displayed when the current time is displayed in other modes.

DST indicator

Casio 3194 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3194

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info