Bedienungsanleitung Casio 3229 (Seite 1 von 3) (Englisch)

641947

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Operation Guide 3229/3421

MA1301-EA

E-1

About This Manual

• Depending on the model of your watch, display text

appears either as dark figures on a light background

or light figures on a dark background. All sample

displays in this manual are shown using dark figures

on a light background.

• Button operations are indicated using the letters

shown in the illustration.

E-3

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To set the time and date ......................................................................................... E-6

To switch the backlight function on and off ......................................................... E-9

To set the alarm time ............................................................................................ E-11

To stop the alarm .................................................................................................. E-13

To switch an alarm and Hourly Time Signal on and off .................................... E-13

To set the countdown time .................................................................................. E-14

To use the countdown timer ................................................................................ E-15

To switch auto repeat timing on and off ............................................................. E-16

To measure elapsed time ..................................................................................... E-17

To record split times ............................................................................................. E-18

To time first and second place finishes .............................................................. E-18

E-4

General Guide

• Press C to change from mode to mode.

Timekeeping Mode Alarm Mode

Press C.

E-5

• After you perform an operation in any mode, pressing C returns to the Timekeeping

Mode.

• Press D in any mode to illuminate the display. Illumination turns off about two

seconds after you release D.

Countdown Timer Mode Stopwatch Mode

E-6

Timekeeping

To set the time and date

1. Press A while in the Timekeeping Mode. The

seconds digits flash on the display because they

are

selected

2. Press C to change the selection in the following

sequence.

Seconds

Day

Hour

Minutes

Year

Month

Day of week

Month

Day

Hour

PM indicator

Minutes

Seconds

E-7

3. While the seconds digits are selected (flashing), press B to reset the seconds to

“00”. If you press B while the seconds count is in the range of 30 to 59, the seconds

are reset to “00” and 1 is added to the minutes. If the seconds count is in the range

of 00 to 29, the minutes count is unchanged.

4. While any other digits (besides seconds) are selected (flashing), press B to increase

the number. Holding down B changes the number at high speed.

• To switch between the 12-hour and 24-hour formats, press

D while some

digits are flashing.

5. After you set the time and date, press A to return to the Timekeeping Mode.

• The day of the week is automatically set in accordance with the date.

• The date can be set within the range of January 1, 2000 to December 31, 2099.

• If you do not operate any button for a few minutes while a selection is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

E-8

About the backlight

When you switch the backlight function on, the backlight of the watch flashes

whenever alarm (page E-10), countdown timer or hourly time signal is sounding.

• Pressing D at any time illuminates the display, regardless of the backlight’s on/off

setting.

• The backlight of this watch employs an electro-luminescent (EL) light, which loses

its illuminating power after very long term use.

• Frequent use of the backlight shortens the battery life.

• The watch will emit an audible sound whenever the display is illuminated. This is

caused by a transistor that vibrates when the EL panel lights up. It does not indicate

malfunction of the watch.

• The illumination provided by the backlight may be hard to see when viewed under

direct sunlight.

• The backlight automatically stops illuminating whenever an alarm sounds.

E-9

To switch the backlight function on and off

In the Timekeeping Mode, hold down B for about two seconds to switch the backlight

function on and off. When you switch the backlight function on, an indicator appears

on the display as shown.

Backlight function

on indicator

• The backlight function on indicator remains on the display in all modes until you

switch the backlight function off.

• The above operation controls operation of the backlight function only. It does not

affect operation of audible tones and signals.

E-2

Contents

General Guide ......................................................................................................... E-4

Timekeeping ............................................................................................................ E-6

Alarm ...................................................................................................................... E-10

Countdown Timer ................................................................................................. E-14

Stopwatch .............................................................................................................. E-17

Specifications ....................................................................................................... E-19

Casio 3229 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3229

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info