624856

Casio 3259 - PRG-250 Seite 3

3
Zoom out
Zoom in
Vorherige Seite
1/14
Nächste Seite
Operation Guide 3259
E-16
Selecting a Mode
• The illustration below shows which buttons you need to press to navigate between modes.
• To return to the Timekeeping Mode from any other mode, hold down
D
for about two seconds.
World Time
Mode
Data Recall
Mode
Tide/Moon Data
Mode
Stopwatch Mode
Countdown
Timer Mode
Timekeeping Mode
Alarm Mode
World Time
Mode
Data Recall
Mode
Tide/Moon Data
Mode
Stopwatch Mode
Countdown
Timer Mode
Timekeeping Mode
Alarm Mode
E-17
Altimeter Mode
Barometer/
Thermometer Mode
Digital Compass Mode
Sensor Modes
Altimeter Mode
Barometer/
Thermometer Mode
Digital Compass Mode
Sensor Modes
• You can use buttons
A
,
B
, and
C
to enter a sensor mode directly from the Timekeeping Mode or
from another sensor mode. To enter a sensor mode from the Tide/Moon Data, Data Recall, Alarm,
Stopwatch, Countdown Timer, or World Time Mode, fi rst enter the Timekeeping Mode and then press
the applicable button.
E-18
General Functions (All Modes)
The functions and operations described in this section can be used in all of the modes.
Direct Timekeeping Mode Access
• To enter the Timekeeping Mode from any other mode, hold down
D
for about two seconds.
Auto Return Features
• The watch will automatically return to the Timekeeping Mode if you do not perform any button operation
for a particular amount of time in each mode.
Mode Name Approximate Elapsed Time
Tide/Moon Data, Data Recall, Alarm, Digital Compass 3 minutes
Altimeter 1 hour minimum
24 hours maximum
Barometer/Thermometer 24 hours
Setting screen (digital setting fl ashing) 3 minutes
• If you leave a screen with fl ashing digits on the display for two or three minutes without performing any
operation, the watch exits the setting screen automatically.
Initial Screens
When you enter the Data Recall, Alarm, World Time, or Digital Compass Mode, the data you were viewing
when you last exited the mode appears fi rst.
Scrolling
The
A
and
C
buttons are used on the setting screen to scroll through data on the display. In most
cases, holding down these buttons during a scroll operation scrolls through the data at high speed.
E-19
Timekeeping
Use the Timekeeping Mode (
HOME
) to set and view the current time and date.
• Each press of
E
in the Timekeeping Mode will change screen contents as shown below.
• If you leave the Tide Graph on the display, it will automatically return to the year screen after about 24
hours.
Year Screen Tide Graph Screen
Barometric
pressure
graph
Day of week
Seconds
Hour :
Minutes
Year
Tide graph
Month Day
Moon phase
indicator
PM
indicator
E-20
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
1. In the Timekeeping Mode, hold down
E
until
SET Hold
appears on
the display and then the city code starts to fl ash.
• The watch will exit the setting mode automatically if you do not
perform any operation for about two or three minutes.
• For details about city codes, see the “City Code Table” at the back
of this manual.
2. Use
A
(East) and
C
(West) to scroll through the available city codes.
• Keep scrolling until the city code you want to select as your Home
City is displayed.
3. Press
D
to display the DST setting screen.
4.
Press
A
to toggle the DST setting between Daylight Saving Time (
ON
)
and standard time (
OFF
).
• Note that you cannot switch between standard time and daylight
saving time (DST) while UTC is selected as your Home City.
PM
indicator
City code
Year
Month Day
Seconds
Hour :
Minutes
DST indicator
PM
indicator
City code
Year
Month Day
Seconds
Hour :
Minutes
DST indicator
E-21
5. After all of the settings are the way you want, press
E
to exit the setting screen.
• To return to the screen in step 1, press
E
again.
• The DST indicator appears to indicate that Daylight Saving Time is turned on.
Note
• After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate
the current time for other time zones based on the current time in your Home City.
* Coordinated Universal Time, the world-wide scientifi c standard of timekeeping.
The reference point for UTC is Greenwich, England.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
E
until
SET Hold
appears on
the display and then the city code starts to fl ash.
2. Press
D
to display the DST setting screen.
3. Press
A
to toggle the DST setting between Daylight Saving Time (
ON
)
and standard time (
OFF
).
4. After all of the settings are the way you want, press
E
to exit the
setting screen.
• To return to the screen in step 1, press
E
again.
• The DST indicator appears to indicate that Daylight Saving Time is
turned on.
DST indicatorDST indicator
E-22
Confi guring Current Time and Date Settings
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
To change the current time and date settings
1. In the Timekeeping Mode, hold down
E
until
SET Hold
appears on
the display and then the city code starts to fl ash.
PM
indicator
City
code
Month Day
Seconds
Hour : Minutes
Year
PM
indicator
City
code
Month Day
Seconds
Hour : Minutes
Year
E-23
2. Press
D
to move the fl ashing in the sequence shown below to select the other settings.
Thermometer/Barometer/
Altitude unit
Power
Saving
Illumination
Duration
Button Operation
Tone On/Off
Day
Month
City Code
DST
12/24-Hour
Format
Seconds Hour Minutes Year
• The following steps explain how to confi gure timekeeping settings only.
3. When the timekeeping setting you want to change is fl ashing, use
A
and/or
C
to change it as
described below.
Screen To do this: Do this:
Change the city code Use
A
(East) and
C
(West).
Toggle between Daylight Saving Time (
ON
) and
Standard Time (
OFF
).
Press
A
.
Toggle between 12-hour (
12H
) and 24-hour (
24H
)
timekeeping.
Press
A
.
Reset the seconds to
00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Press
A
.
Change the hour or minutes
Use
A
(+) and
C
(–).
Change the year, month, or day
3 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 3259 - PRG-250 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info