Bedienungsanleitung Casio 3285 - G-8900 (Seite 2 von 5) (Englisch)

624515

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 3285

E-19

To toggle a city code time between Standard Time and Daylight Saving Time

DST indicator

In the World Time Mode, use 1. D and B to display the

city code (time zone) whose Standard Time/Daylight

Saving Time setting you want to change.

Hold down 2. A for about one second to toggle Daylight

Saving Time (DST displayed) and Standard Time (DST

not displayed).

The x DST indicator is on the display whenever you display

a city code for which Daylight Saving Time is turned on.

Note that the DST/Standard Time setting affects only x

the currently displayed city code. Other city codes are

not affected.

Note that you cannot switch between Standard Time x

and Daylight Saving Time while UTC is selected as the

city code.

E-18

World Time

City code

Current time and date in

the zone of the selected

city code

World Time shows the current time in 48 cities (31 time

zones) around the world.

All of the operations in this section are performed in x

the World Time Mode, which you enter by pressing C

(page E-6).

To view the time for another city code

While in the World Time Mode, use D (eastward) and B

(westward) to scroll through the city codes (time zones).

For full information about city codes, see the “City Code x

Table” at the back of this manual.

If the current time for a city is wrong, check your x

Timekeeping Mode time and time zone settings and

make the necessary changes.

E-17

Swapping the Home City Time with a Local Time

You can use the procedure below to swap the current Home City Time (T-1) with one

of the Local Times (T-2, T-3, T-4).

In the Timekeeping Mode, use 1. D to display the Local Time that you want to swap

with the Home City Time.

Press 2. A and B at the same time.

E-16

12/24-Hour Format

With the 12-hour format, the x P (PM) indicator appears to the left of the hour digits for

times in the range of noon to 11:59 p.m. and no indicator appears to the left of the

hour digits for times in the range of midnight to 11:59 a.m.

With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without x

any indicator.

The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is x

applied in all other modes.

Changing the City Setting of a Local Time

You can select any one of the city codes in the table at the back of this manual as a

Local Time city.

Display the Local Time whose city setting you want to change, and then hold down 1.

A for about one second until the current city code starts to ﬂ ash.

Use 2. D (east) and B (west) to select the city code you want.

Press 3. C to display the DST setting screen.

Press 4. D to toggle between Daylight Saving Time (

displayed) and Standard

Time (

displayed).

After the settings are the way you want, press 5. A.

E-15

To toggle the Timekeeping Mode time between DST and Standard Time

DST indicator

Use 1. D to display the current Home City Time (T-1)

screen.

Hold down 2. A until the seconds start to ﬂ ash, which

indicates the setting screen.

Press 3. C to display the DST setting screen.

Press 4. D to toggle between Daylight Saving Time

(

displayed) and Standard Time ( displayed).

Press 5. A to exit the setting screen.

The x DST indicator appears on the Timekeeping screen to

indicate that Daylight Saving Time is turned on.

E-14

See “Daylight Saving Time (DST)” on page E-14 for details about DST setting. x

For information about Flash Alert, see “Flash Alert” (page E-41). x

Press 5. A to exit the setting screen.

The day of the week is displayed automatically in accordance with the date (year, x

month, and day) settings.

Daylight Saving Time (DST)

Daylight Saving Time (summer time) advances the time setting by one hour from

Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

E-13

Screen To do this: Do this:

Reset the seconds to .

Press D.

Toggle between Daylight Saving Time ( )

and Standard Time ( ).

Change the city code.

Use D (east) and B (west).

Change the hour or minutes.

Use D (+) and B (–).

Toggle between 12-hour ( ) and 24-hour

(

) timekeeping.

Press D.

Change the year.

Use D (+) and B (–).

Change the month or day.

Toggle the setting between 1.5 seconds

(

) and 3 seconds ( ).

Press D.

Toggle between Flash Alert on ( ) and

off

( ).

E-12

CCC CCC

CCCCC

Seconds DST City Code Hour Minutes

YearMonthDay

Flash Alert

Illumination Duration Setting

12/24-Hour Format

When the setting you want to change is ﬂ ashing, use 4. D and B to change it as

described below.

E-11

Changing the Current Home City Time and Date Settings

Use 1. D to display the current Home City Time (T-1)

screen.

Hold down 2. A until the seconds start to ﬂ ash, which

indicates the setting screen.

Press 3. C to move the ﬂ ashing in the sequence shown

below to select other settings.

E-10

While the Home City Time (T-1) screen is displayed, pressing x A will switch the day

of the week / month-day indication to the currently selected Home City code and the

T-1 indicator for about one second.

You can change the current time setting for your Home City Time (T-1) only. x

For Local Times (T-2, T-3, T-4), you only can change the city code and DST setting. x

Scrolling through the Time Screens

In the Timekeeping Mode (page E-6), holding down x D for about three seconds will

cycle the time screens in sequence, from T-1 through T-4.

Pressing any button will display the Home City Time (T-1) screen. x

Casio 3285 - G-8900 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3285 - G-8900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info