Bedienungsanleitung Casio 3403 - GD-350 (Seite 3 von 7) (Englisch)

624519

Zoom out

Zoom in

Vorherige Seite

1/7

Nächste Seite

Operation Guide 3403

E-29

●

To change an alarm time setting, hold down

for about two seconds until

the hour digits of the current alarm time start to ﬂ ash.

[SET Hold] will appear on the display. After that, [SET

Hold] will disappear and the hour digits will ﬂ ash.

●

Each press of

causes the ﬂ ashing to move between the hour and the

minutes digits.

The ﬂ ashing digits are the ones that are selected.

●

Use

and

to change the ﬂ ashing setting, and set the hour and minutes

you want.

Holding down either button scrolls the setting at high speed.

If you are using 12-hour timekeeping, the PM indicator will appear for times x

between noon and 11:59 p.m.

E-28

Hourly time signal

: Hourly time signal does not sound.

: Hourly time signal sounds every hour on the hour.

The Alarm indicator is displayed while an alarm is turned on, while the Hourly

time signal indicator is displayed while the hourly time signal is turned on.

When the snooze alarm is turned on, both the alarm indicator and the snooze

indicator are displayed.

Hourly time signal on

Hourly time signal indicator

Alarm on

Alarm indicatorSnooze indicator

E-27

●

Use

to select the alarm type or to toggle the hourly time signal between

on and off.

Alarm 1 to 4

: Alarm does not sound.

Alarm sounds only once at the preset time and does not sound again after

that.

: Alarm sounds at the preset time each day.

Snooze alarm

: Alarm does not sound.

Alarm sounds at the preset time each day, and up to seven times at ﬁ ve-

minute intervals thereafter.

E-26

To change an alarm setting

●

In the Alarm Mode, use

to select the alarm whose setting you want to

change.

Alarm 1

( )

D D

Alarm 2

( )

Alarm 3

( )

Alarm 4

( )

Hourly Time

Signal ( )

Snooze alarm

( )

D D

E-25

Alarm setting screen

Alarm number

Current time

Hourly time signal setting screen

Current time

Note

If you do not perform any operation for about two or three minutes while in the Alarm

Mode, the watch will automatically return to the Timekeeping Mode.

E-24

Alarms and Hourly Time Signal

You can set up to ﬁ ve different alarms. When any one of the alarm times is reached

the watch will sound an alarm tone and ﬂ ash its display illumination, or it will vibrate

for about 10 seconds. The hourly time signal causes the watch to sound a tone and

ﬂ ash its display illumination or to vibrate every hour on the hour.

See “To change the alarm/timer alert method” (page E-44).

To enter the Alarm Mode

●

In the Timekeeping Mode, press

twice to enter the Alarm Mode.

See “Using Modes” (page E-12).

[ALARM] will appear on the display for about one second. After that, an alarm

setting screen (Alarm 1 through Alarm 5, or hourly time signal) will appear.

E-23

Note

Summer time, or Daylight Saving Time (DST) as it is known in some countries,

calls for setting clocks ahead one hour from standard time during the summer

season. Note that the period during which and the areas where summer time is

applied depend on each country. Some countries or geographic areas may not use

summer time.

The DST indicator will be on the display and timekeeping will be advanced by one

hour when summer time is turned on.

The summer time setting cannot be changed for the UTC World Time zone. x

The summer time setting is applied to the currently selected time zone only. A x

setting conﬁ gured for one time zone does not affect any other time zone.

E-22

To conﬁ gure the Summer Time (DST) setting

●

In the World Time Mode, hold down

for about two seconds.

[DST Hold] will appear on the display. After that,

[DST Hold] will disappear and the summer time

setting will toggle to either on or off.

x DST on the display indicates that summer time is

turned on.

DST indicator

E-21

Note

Scrolling of the World Time city name will stop after about two minutes. To re-

start scrolling, press A.

●

Use

and

to scroll through the World Time Mode city names.

See “City Name List” (back of this manual).

Scrolling to a city name displays the current time in that city. x

Holding down either button scrolls at high speed. x

To display the UTC city name (UTC offset 0), press x B and D at the same

time.

●

To return to the Timekeeping Mode, press

four times.

E-20

World Time

World Time lets you display the current time in any one of 100 cities (35 time zones)

around the world.

To view the times in other time zones

●

In the Timekeeping Mode, press

to enter the World Time Mode.

See “Using Modes” (page E-12).

[WT100] will appear on the display for about

one second, and then the name of the

currently selected World Time city will scroll

across the display.

Current date in

World Time city

Current time in

World Time city

City name

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 3403 - GD-350 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 3403 - GD-350

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info