Operation Guide 2734 58 3748 9
4
Timekeeping
Use the Timek
also explains ho
• All of the operations in this section are performed in the
you can enter bC.
Day of week
Hour: Minutes Seconds Month — Day
A
▲
A
▲
Press A .
▲
Seconds
Month — Day
▲
Press D.
Last Signal Screen
▲
Setting the Digital
Make sure you select y
date settings.
Timekeeping Mode settings.
correct if you do not select the proper Home City code bef
date in the Timek
T
1. In the A until the
transmitter indicator starts to flash, which indicates the
setting screen.
2. Use A or C to move the flashing in the sequence
shown below to select other settings
Auto
Receive
DSTCity Code
Seconds
Hour Minutes
12/24-Hour
For
Day
Month Y
/ Press A .
Press C .
T
C
C
A
T
City Settings
Time/Date
Settings
3. When the setting you wB and/or D to change it as
described below
Screen: T
Change the transmitter setting (A/T ,
MSF, or DCF)
Change the city code
T
Time (
ON) , Standard Time ( OFF),
or Auto DST (A)
T
(
ON) and off ( OF)
Do this:
Use D.
Use D (east) and B (west).
Press D.
Press D.
T
DST
• See “City Code ” f
4. Use A to exit the setting screen.
• If a TA twice
• If a Time/Date Setting screen is displaA once
• When you exit the setting screen, the analog hands are adjusted automatically to
match the digital time.“ Analog Timekeeping” for more inf
Note
• See “ T” f
• Auto DST (
A) can be selected only while BER, PAR, LON, or ATH is selected as the
Home City code.“Daylight Saving ” below
Screen: T
T12H )
and 24-hour (24H ) timekeeping
Reset the seconds to 00
Change the hour or minutes
Change the month, day
Do this:
Press D.
Press D.
Use D (+) and B ( – ).
Use D (+) and B ( – ).
Time/Date Settings
• The auto receive setting is used for time calibration signal reception only
“About Auto Receiv” f
Daylight Saving
Daylight Sa
Standard
Saving Time.
The time calibration signals transmitted from Rugby and Mainflingen include both
Standard Time and DST data.
switches between Standard
accordance with the received time signal.
• The default DST setting is Auto DST (
A) whenevBER , PAR , LON ,
or
ATH as your Home City code.
• If you experience prob
probably best to s
time) manually
T
1.A until transmitter indicator starts to flash,
which indicates the setting screen.
2.C twice and the DST setting screen appears.
3.D to cycle through the DST settings in the sequence shown below
4.A twice to exit the setting screen.
Auto DST(
A
) DST off(
OFF
) DST on(
ON
)
Analog Timekeeping
The analog time of this watch is synchronized with the digital time
setting is adjusted automatically whenev
Note
• The hands for the analog timepiece mo
of the following occurs
When you change the digital time setting manually
When the digital time setting is changed by time calibration signal reception
When you change the Home City code and/or DST setting
• If the analog time does not match the digital time for an
described under “ T” to match the analog setting to the
digital setting.
• Whenev
manually
• Depending on how much the hands ha
time, it ma
T
1. In the C six times to enter
the Hand Setting Mode.
2. Hold down A until the current digital time star
flash, which indicates the setting screen.
3. Use D (+) and B ( – ) to adjust the analog setting as
described below
Current time
Move the hand setting
forward 20 seconds
Perf
• Press D.
Mov
20 seconds
Move the hand setting a short
wa
Mov
short way back at high speed
Mov
long wa
speed
• Press B.
• Hold down D.
• Release D when the hands reach the setting
you want.
• Hold down B.
• Release B when the hands reach the setting
you want.
• While holding down D to mov
high-speed, press B to lock the high-speed
hand movement.
• Press any button when the hands are close
to the setting you want.
• Hand movement stops automatically if the
hour hand makes one full (12-hour)
rev
Mov
wa
• While holding down B to mov
high-speed, press D to lock the high-speed
hand movement.
• Press any button when the hands are close
to the setting you want.
• Hand movement stops automatically if the
hour hand makes one full (12-hour)
rev
4. Press A to exit the setting screen.
• The minute hand will be adjusted slightly to match the seconds when you e
setting screen.
• TC.
Reference
This section contains more detailed and technical information about watch
operation.
features and functions of this watch.
Auto return features
• If y ou leav e the w atch in the Alar m (e xcept f or the target alar m screen e xpl ained
under “ T” ), Date Alert, or Hand Setting Mode for two or three
minutes without performing any operation, it automatically changes to the
Timekeeping Mode.
• If you leav
three minutes without perf
you hav
Scrolling
The B and D buttons are used in v
through data on the display
scroll operation scrolls through the data at high speed.
Initial Screens
When you enter the
viewing when you last e
Radio-controlled Timekeeping
• Strong electrostatic charge can result in the wrong time being set.
• Even when the watch is within the reception range of the tr
reception is impossible if the signal is b
formations between the watch and signal source
• Signal reception is affected by w
changes.
• The time calibration signal is bounced off the ionosphere.
factors as changes in the reflectivity of the ionosphere
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day ma
impossible
• Even if the time calibration signal is receiv
cause the time setting to be off by up to one second.
