Operation Guide 4334
1
MO0607-EB
Warning!
• The measurement functions built into this watch are not intended for use in taking
measurements that require professional or industrial precision. V
by this watch should be considered as reasonably accurate representations only
• CASIO COMPUTER CO., L
claims by third parties that may arise through the use of this watch.
Getting Acquainted
Congratulations upon your selection of this CASIO watch. T
purchase, be sure to read this manual carefully
About This Manual
• Button operations are indicated using the letters shown
in the illustration.
• For the sake of simplicity
manual do not show the analog hands of the watch.
• Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)
General Guide
• Press C to change from mode to mode.
• In any mode, press L to illuminate the display
Recall Mode
World Time Mode
Stopwatch Modes
▲
▲
Countdown Timer
Mode
▲
▲
Alarm Mode
Press C.
▲
Hand Setting Mode
TimeKeeping Mode
▲
▲
This watch has two
stopwatch modes. See
“Stopwatches” for more
information.
Timekeeping
Use the T
time and date.
This watch features separate digital and analog
timekeeping. The procedures for setting the digital time
and analog time are different.
• See “Thermometer” for details about the thermometer
Setting the Digital Time and Date
This watch is preset with UTC differential values that
represent each time zone around the globe. Before setting
the digital time, be sure to first set the UTC differential for
your Home Time, which is the location where you normally
will be using the watch.
• Note that World T
based on the time and date settings you configure in the
Timekeeping Mode.
PM indicator
Hour : Minutes
Seconds
Month – Day
Thermometer
Day of week
To set the digital time and date
1. In the TA until the
seconds start to flash, which indicates the setting
screen.
• Be sure to configure the correct UTC differential for
your Home T
Timekeeping Mode settings.
• See the “UTC Dif
information about the UTC differential settings that are
supported.
2. Press C to move the flashing in the sequence shown
below to select other settings.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Seconds
Hour
UTC
Differential
Minutes
Year
DST
Day
Month
Seconds
Temperature
Unit
12/24-Hour
Format
Temperature Sensor
Calibration
Screen: To do this:
Reset the seconds to 00
Toggle between Daylight Saving
Time (ON) and Standard Time ( OF)
Specify the UTC differential
Change the hour or minutes
Toggle between 12-hour (12H ) and
24-hour (24 H ) timekeeping
Do this:
Press D.
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
Press D.
Use D (+) and B (–).
Change the year
Change the month or day
3. When the setting you want to change is flashing, use D and B to change it as
described below.
• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.
• For information about settings other than the time and date, see the following.
Temperature Sensor Calibration: “Thermometer”
Temperature Unit: “Thermometer”
4. Press A to exit the setting screen.
• The 12-hour/24-hour timekeeping format you select in the T
applied in all modes.
• The day of the week is displayed automatically in accordance with the date (year
month, and day) settings.
• When DST is turned on, the UTC differential setting range is –1
hour units.
• Any time the seconds setting is changed, the analog hands are adjusted accordingly
• See “Daylight Saving T
Daylight Saving Time (DST) Setting
Daylight Saving T
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode digital time between DST and Standard T
1.In the TA until the
seconds start to flash, which indicates the setting
screen.
2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving T
ON
displayed) and Standard Time (OF displayed).
4. Press A to exit the setting screen.
• The DST indicator appears on the Timekeeping,
and Hand Setting Mode screens to indicate that
Daylight Saving T
Setting the Analog T
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
DST indicator
On/Off status
To adjust the analog time
1. In the TC six times to enter
the Hand Setting Mode.
2. Hold down A until the current digital time starts to
flash, which indicates the setting screen.
3. Use D to adjust the analog setting.
• Press D once to advance the hands 20 seconds.
• Hold down D to advance the hands at high speed.
• To lock high speed hands movement, hold down D to start it and then press B
to lock. The hands will continue to advance for one 12-hour cycle or until you
press any button to stop it.
High-speed hand movement also will stop automatically after the time advances
12 hours or if an alarm (daily alarm, Hourly T
starts to sound.
4. Press A to exit the setting screen.
• The minute hand will be adjusted slightly to match the seconds when you exit the
setting screen.
• Toreturn to the C.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Stopwatches
Your watch has two stopwatch modes: a Single Stopwatch
Mode and a Dual Stopwatch Mode. Both stopwatch
modes measure times in 1/100-second units for the first
hour
modes, timing is possible up to 99 hours, 59 minutes,
59.99 seconds.
The Single Stopwatch Mode (ST1) displays the total
elapsed time and lap times for a single vehicle or runner
The Dual Stopwatch Mode (ST2) can be used to measure
elapsed time for two vehicles or runners at the same time,
including separate lap times and the time differential
between vehicles or runners.
The data produced by either stopwatch mode is stored
automatically in watch memory
need it.
• When the elapsed time being kept by either of the stopwatches exceeds 99 hours,
59 minutes, 59.99 seconds, the displayed time returns to all zeros and time
measurement continues from there. Elapsed time measurement continues until you
reset it to all zeros.
• All of the operations in this section are performed in the stopwatch modes, which
you enter by pressing C.
