Bedienungsanleitung Casio 4379 (Seite 1 von 5) (Englisch)

445422

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 4378 4379

MO0603-EA

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Each section of this manual provides you with the

information you need to perform operations in each

mode. Further details and technical information can be

found in the “Reference” section.

General Guide

• Press C to change from mode to mode.

• In any mode, press B to illuminate the display.

▲

Alarm Mode

Stopwatch Mode

▲

Timekeeping Mode

Press C.

▲

World Time Mode

Hand Setting Mode

Radio-controlled Timekeeping

This watch receives a time calibration signal and updates

its time setting accordingly. The time calibration signal

includes both Standard Time and Daylight Saving Time

(summer time) data.

• This watch is designed to pick up the time calibration

signal transmitted from Rugby, England and the signal

from Mainflingen, Germany.

Day

Day of week

Minute hand

Hour hand

Second hand

Current Time Setting

This watch automatically adjusts its time setting in accordance with a time calibration

signal. You can also perform a manual procedure to set the time and date, when

necessary.

• The first thing you should do after purchasing this watch is to set your Home City,

which is the city where you will normally use the watch. For more information, see

“To set your Home City” below.

• When using the watch in an area that is outside of the range of the transmitters in

Rugby and Mainflingen, you need to manually adjust the time as required. See

“Timekeeping” for information about manual settings.

• The analog time of this watch is synchronized with the digital time. Because of this,

the analog time setting is automatically adjusted whenever you change the digital

setting. See “Analog Timekeeping” for more information.

To set your Home City

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

• The second hand will move at high speed to the 12

o’clock position, where it will stop.

2. Use D (east) and B (west) to select the city code you

want to use as your Home City.

• The following are the city codes for major cities in the

Western Europe time zones.

LON: London

PAR and BER: Paris, Berlin, Milan, Rome,

Amsterdam, Hamburg, Frankfurt,

Vienna

ATH: Athens

3. Press A to exit the setting screen.

• The second hand will advance at high speed to the

correct position in accordance with seconds count of the

digital time, and resume normal movement from there.

City code

• Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive (in

the middle of the night). You can also perform manual receive or you can set the time

manually.

• If you are in an area that does not use Daylight Saving Time (summer time), turn off

the DST setting.

• The watch will receive the time calibration signal automatically from the applicable

transmitter (in the middle of the night) and update its settings accordingly. For

information about the relationship between city codes and transmitters, see

“Transmitters”.

To display the digital time and last signal screen

• In the Timekeeping Mode, press A to cycle through the digital time screens as

shown below.

• In the Timekeeping Mode, press D to display the last signal screen. The last signal

screen shows the date and time of the last successful time calibration signal

reception.

Last Signal Screen

Reception date

Day of week

Press A.

Day

▲

Receiving indicator

▲

2 seconds

Press D.

Hour :

Minutes

Reception Time

PM indicator

Date Screen

Receiving

Indicator and

Seconds Count

Current Time

Screen

▲

Seconds

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive.

• Auto Receive

With auto receive, the watch receives the time calibration signal automatically up to

six times a day. When any auto receive is successful, the remaining auto receive

operations are not performed. For more information, see “About Auto Receive”.

• Manual Receive

Manual receive lets you start time calibration signal reception with the press of a

button. For more information, see “To perform manual receive”.

Important!

• When getting ready to receive the time calibration signal, position the watch as

shown in the nearby illustration, with its 12 o’clock side facing towards a window.

Make sure there are no metal objects nearby.

Resin Band

Metal Band

• The watch should not be on its side or facing the wrong way.

• Proper signal reception can be difficult or even impossible under the conditions listed

below.

Inside or

among

buildings

Inside a

vehicle

Near

household

appliances,

office

equipment,

or a mobile

phone

Near a

construction

site, airport, or

other sources

of electrical

noise

Near high-

tension

power lines

Among or

behind

mountains

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 4379 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 4379

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info