Bedienungsanleitung Casio 4397 (Seite 1 von 3) (Englisch)

644573

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Operation Guide 4397/5079

MA0905-EA

About This Manual

• The operational procedures for Modules 4397 and 5079 are identical. All of the

illustrations in this manual show Module 4397.

• Depending on the model of your watch, display text appears either as dark figures

on a light background or light figures on a dark background. All sample displays in

this manual are shown using dark figures on a light background.

• Button operations are indicated using the letters shown in the illustration.

• Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the “Reference” section.

Module 4397 Module 5079

Timekeeping Mode World Time Mode Stopwatch Mode Alarm Mode Hand Setting Mode

Press .

Mode indicator

General Guide

• Press C to change from mode to mode.

• In any mode (except when a setting screen is on the display), press B to illuminate

the face of the watch for about one second.

Timekeeping

Use the Timekeeping Mode to set and view a digital display of the current time and

date.

• All of the operations in this section are performed in the Timekeeping Mode, which

you enter by pressing C.

• In the Timekeeping Mode, you can press A to change the display format as shown

below.

Seconds PM indicator

Day of the Week – Day Hour : Minutes

Press .

Digital Time and Date

When setting the digital time, you can also configure settings for summer time

(Daylight Saving Time or DST), your Home City code (the code for the city where you

normally use the watch), and the 12/24-hour format.

• This watch is preset with a number of city codes, each of which represents the time

zone where that city is located. When setting the digital time, it is important that you

select the correct city code for your Home City. If your location is not included in the

preset city codes, select the preset city code that is in the same time zone as your

location.

• Note that all of the times for the World Time Mode city codes are displayed in

accordance with the digital time and date settings you configure in the Timekeeping

Mode.

• After you correctly set your Home City time and date, you can set the watch up for

timekeeping with a different city code simply by changing the Home City code in the

Timekeeping Mode.

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the Home

City code starts to flash, which indicates the setting

screen.

2. Use D and B to select the code you want.

• Make sure you select your Home City code before

changing any other setting.

• For full information on city codes, see the “City Code

Table”.

3. Press C to move the flashing in the sequence shown below to select the other

settings.

SecondsDSTHome City Code

HourMinutesDay Month Year

12/24-Hour format

4. When the setting you want to change is flashing, use D and B to change it as

described below.

Screen To do this:

Change the Home City code

Toggle between Daylight Saving Time (

)

and Standard Time (

OFF

)

Toggle between 12-hour (

12H

) and 24-hour

(

24H

) timekeeping

Reset the seconds to 00

Change the hour or minutes

Change the year

Change the month or day

Do this:

Press D (eastward) and B

(westward).

Press D.

Press D (+) and B (–).

• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

5. Press A to exit the setting screen.

• Resetting the seconds to 00 while the current count is in the range of 30 to 59

causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are

reset to 00

without changing the minutes.

• With the 12-hour format, the P (PM) indicator appears on the display for times in the

range of noon to 11:59 p.m. and no indicator appears for times in the range of

midnight to 11:59 a.m.

• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without

any indicator.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

• The year can be set in the range of 2000 to 2099.

• The watch’s built-in full automatic calendar makes allowances for different month

lengths and leap years. Once you set the date, there should be no reason to change

it except after you have the watch’s batteries replaced.

• The day of the week is automatically displayed in accordance with the date (year,

month, and day) settings.

Daylight Saving Time (DST) Setting

Daylight Saving Time (summer time) advances the digital time setting by one hour

from Standard Time. Remember that not all countries or even local areas use Daylight

Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the Home

City code setting start to flash, which indicates the setting

screen.

2. Press C once to display the DST setting screen.

3. Press D to toggle between Daylight Saving Time (ON

displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

• The DST indicator appears to indicate that Daylight

Saving Time is turned on.

DST indicator

Casio 4397 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 4397

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info