Operation Guide 4734 4735
2
• The “Site Data List ” provides UTC diff
world.
• The following is the initial f
first purchase the watch and whenev
these settings to match the area where you normally use the watch.
UTC differential
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Longitude
value
Longitude
(east/west)
T
1.A until the
seconds start to flash, which indicates the setting
screen.
2.C twice to display the UTC diff
screen, and confirm that the setting is correct.
• If the UTC differential setting is not correct, use D (+)
and B ( – ) to change it.
3.A to display the longitude v
4.C to toggle the flashing between the longitude
value and the longitude unit (east/west).
5.D
and B to change it as described below
Setting
Longitude V
Longitude Unit
(East/West)
Button Operations
Use D (+) and B ( – ) to change the setting.
• Y° to 180 ° , in 1-
degree units
Use D to switch between east longitude (
)
and west longitude (
).
Screen
6. Press A to exit the setting screen.
Setting the Analog
Perf
match the time of the digital display
l
l
l
l
l
l
l
l
l
l
l
l
l
l
T
1. In the C sev
enter the Hand Setting Mode.
2. Hold down A until the current digital time starts to
flash, which indicates the setting screen.
3. Use D to adjust the analog setting.
• Press D once to advance the hands 20 seconds
• Hold down D to adv
• TD to start it and then press B
to lock.
press any button to stop it.
It will also stop automatically after the time advances 12 hours or if an alarm (daily
alarm, Hourly Time Signal, or countdown beeper) starts to sound.
4. Press A to exit the setting screen.
• The minute hand will be adjusted slightly to match the seconds when you e
setting screen.
• TC.
Hunting/Fishing Mode
The Hunting/Fishing Mode displays an indicator that
shows, as one of fiv
date and time (minute 00 to minute 59 of a particular
hour) for hunting or fishing.
display Moon Data (Moon age and Moon phase) f
specific date.
• If you suspect that the hunting/fishing le
current Moon data is wrong for some reason, chec
current
Home Site), and correct them if required.
• See “Moon Phase Indicator ” for inf
Moon phase indicator
• All of the operations in this section are performed in the
Hunting/Fishing Mode, which you enter bC.
Month – Day
Time
HUNT/FISH
indicator
Moon phase
indicator
Hunting/Fishing
Level Screen
Hunting/Fishing
level indicator
Hunting/Fishing Level Indicator
The hunting/fishing lev
time (calculated in accordance with Moon transit and phase) as shown in the tab
below
Level 5 Level 4 Level 3 Level 2 Level 1
Module
4734
4735
Upper
Lower
W
East
Other
Moon T
Moon Phase
New moon*
Full moon
First quarter
Last quarter
Other
Lev
Lev
Lev
Lev
Lev
Lev
Lev
Lev
Lev
*
These indicators actually appear during Moon ages 13.0 to 16.6 (Full Moon and
phase
preceding it).
• The hunting/fishing level indicator changes in accordance with the Moon data.
• In the TimekHUNT /FISH indicator flashes whene
fishing lev
T
In the Hunting/Fishing Mode, press A to toggle between the hunting/fishing le
screen and the Moon Data screen.
• The hunting/fishing lev
hunting/fishing lev
shows the Moon age and Moon phase for the current date
Month – DayTime
Hunting/Fishing
Level Screen
Hunting/Fishing
level indicator
Month – Day
Moon phase
indicator
Moon age
Press A .
▲
▲
Moon Data Screen
• While the hunting/fishing levD to advance to the ne
hour
• While the Moon Data screen is displayD to advance to the ne
• Y
level and Moon data.“T” for more information.
• When you enter the Hunting/Fishing Mode, the screen (hunting/fishing le
data) that was display
Month DayYe a r
Month – Day
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Year
T
1.A until the
year setting starts to flash, which indicates the setting
screen.
2.C to move the flashing in the sequence sho
below to select the other settings.
3.D (+) or B ( – ) to change it.
•
4.A to exit the setting screen.
5.A to display either the hunting/fishing level screen or the Moon Data screen.
Thermometer
This watch uses a temperature sensor to measure temperature.
during each even-n
the thermometer screen.
The watch also takes separate readings and stores them in memory for displa
temperature tendency graph, which can be vie
Measured temperature values are stored in memory for later recall when y
them.
Press A .
▲
▲
Thermometer Screen
Temperature
Temperature
Tendenc
Temperature
tendency
graph
• Y° C) or F° F) units for the thermometer
screen.“ T” f
• The thermometer screen displays temperature values in 0.1 °C units (or 0.2 °F units).
• The display range of the thermometer screen is –10.0 °C to 60.0 °C (or 14.0 °F to
140.0° F).
• Y
values are not correct.“ T” for more information.
Important!
• T
wearing the watch), direct sunlight, and moisture
temperature measurement, remov
ventilated location out of direct sunlight, and wipe all moisture from the case
approximately 20 to 30 min
surrounding temperature.
T
The watch also tak
and stores the results in memory for display on the temper
Depending on the current
shows either the top of the hour measurements or the bottom of the hour
measurements for the past 17 hours
From the top of each hour to the 29th min
in the graph.
readings are shown in the graph.
T
Past 17 hours of
measurement values
Latest measurement
valu
+6.0 to +9.9° C (+10.8 to +17.8° F)
+2.0 to +5.9° C (+3.6 to +10.6°F)
–1.9 to +1.9 °C ( –3.4 to +3.4 °F)
–5.9 to –2.0 °C ( –10.6 to –3.6 °F)
–9.9 to –6.0 °C ( –17.8 to –10.8 °F)
▲
