624483

Casio 5245 - G-1400 Seite 5

5
Zoom out
Zoom in
Vorherige Seite
1/6
Nächste Seite
Operation Guide 5245
E-49
The watch is returning to the Timekeeping Mode automatically from the Alarm Mode x
(page E-43).
■ Hands suddenly stop moving. Button operation also is disabled.
The watch may be in the power recovery mode (page E-12). Do not perform any
operation until the hands return to their normal positions (in about 15 minutes). The
hands should return to their correct positions when normal operation returns. To help
power recover, leave the watch in a location where it is exposed to light.
■ The current time setting is off by hours.
Your Home City setting may be wrong. Check your Home City setting and correct it, if
necessary (page E-20).
■ The current time setting is off by one hour.
Use the procedure under “To toggle the Home City time between standard time and
daylight saving time” (page E-22) to change the STD/DST setting.
E-48
Troubleshooting
Hand Movement and Position
■ I lost track of what mode the watch is in.
Refer to “To select a mode” (page E-18). To return directly to the Timekeeping Mode
from any other mode, hold down C for about two seconds.
■ The
x
Second Hand is moving at two-second intervals.
■ All the watch’s hands are stopped at 12 o’clock and none of the buttons work.
Power may be low. Expose the watch to light until the
x
Second Hand starts moving
normally, at one-second intervals (page E-10).
■ The hands of the watch suddenly start moving at high speed, even when I do
not perform any operation.
This could be due to any one of the following causes. In all cases, the hand movement
does not indicate malfunction, and should stop shortly.
The watch is recovering from a sleep state (page E-14).
x
E-47
After confi rming that the 5.
b
Left Dial Hands are in the
correct home positions, press C. This will advance to
n
Right Dial Hand home position adjustment.
The x
n
Right Dial Hand is in the correct home position
if it is pointing at 12 o’clock. If it isn’t, use D (+) and
B (–) to move it to 12 o’clock.
After confi rming that the 6.
n
Right Dial Hand is in the
correct home position, press C. This will advance to
m
Day home position adjustment.
The x
m
Day is in the correct home position if it
shows 1. If it doesn’t, use D (+) and B (–) to change
the day to 1.
Press 7. A to return to the Timekeeping Mode.
The
x
m
Day moves to the current day, and then the
z
Hour Hand and the
c
Minute Hand move to the current time. Wait until everything stops moving.
6
5*
E-46
After confi rming that the 3.
x
Second Hand is at the proper home position, press C.
This will switch to
z
Hour Hand and
c
Minute Hand home position adjustment.
The x
z
Hour Hand and
c
Minute Hand are at their proper home positions if
they both move to 12 o’clock. The
v
24-hour Hand also will move along with
z
Hour Hand movement, and cannot be adjusted individually. If the hands are
not positioned correctly, use D (+) and B (–) to move them to their proper
home positions.
After confi rming that the 4.
z
Hour Hand and
c
Minute
Hand are in their correct home positions, press C.
This will switch to
b
Left Dial Hands home position
adjustment.
The
x
b
Left Dial Hands are at their proper home
positions if they both move to 12 o’clock. If the hands
are not positioned correctly, use D (+) and B (–) to
move them to 12 o’clock.

B +
*>
E-45
The watch is now in the home position adjustment x
mode.
The watch will exit the adjustment mode automatically x
if you do not perform any operation for about two or
three minutes.
First is
x
x
Second Hand home position adjustment.
If the x
x
Second Hand moves to 12 o’clock, it is in the
correct home position. If it doesn’t, use D to move it
to 12 o’clock.
Each press of
x C in the home position adjustment
mode will cycle through the adjustment settings as
shown below.

@
x
Second
z
Hour/
c
Minute/
v
24-hour
b
Left Dial Hands
n
Right Dial Hand
m
Day
C C
CC
C
E-44
Adjusting the Home Positions
Strong magnetism or impact can cause the hands and/or date of the watch to be off.
If this happens, perform the applicable home position adjustment procedures in this
section.
Note
Any time after you enter the home position adjustment mode in step 1 of the following
procedure, you can return to the Timekeeping Mode by pressing A. The watch also
will return to the Timekeeping Mode automatically if you do not perform any operation
for about two or three minutes in home position adjustment mode. In either case, any
adjustments you made before the watch returned to the Timekeeping Mode will be
applied.
To adjust the home positions
Hold down 1. C for about two seconds until the watch beeps twice and enters the
Timekeeping Mode.
Hold down 2. D for about three seconds until the watch beeps.
E-43
To change the alarm time setting
Use 1. C to move the
n
Right Dial Hand to ALM.
Use 2. D (+) and B (–) to change the alarm time setting.
Each press of either button will move the
x
b
Left Dial Hands one minute.
Holding down x D or B will start high-speed hand movement in the applicable
direction. To stop high-speed hand movement, press any button.
The alarm always works based on the time kept in the Timekeeping Mode.
x
The watch will return to the Timekeeping Mode automatically if you do not x
perform any operation in the Alarm Mode for about two or three minutes.
To turn the alarm on or off
In the Alarm Mode, press A to toggle the alarm on and off. The
x
Second Hand will
indicate the current ON/OFF setting.
To stop the alarm
Press any button.
E-42
Using the Alarm
When the alarm is turned on, an alarm will sound for about 10 seconds each day
when the time in the Timekeeping Mode reaches the preset alarm time. This is true
even if the watch is not in the Timekeeping Mode.
Hand Functions
x
Second Hand:
Indicates the current alarm ON/OFF setting.
b
Left Dial Hands:
Indicate the current alarm time setting in 24-hour
format.
n
Right Dial Hand: Points to ALM.

* 6
@
E-41
After swapping the Home City and World Time City, the watch will stay in the x
World Time Mode. The
x
Second Hand will point to your new World Time City
(TYO in this example).
The
x
b
Left Dial Hands will indicate the current time in your new World Time City.
E-40
To swap your Home City and World Time City
In the World Time Mode, use 1. D to select the World Time City you want.
In this example, you would move the
x
x
Second Hand
to NYC in order to select New York as the World
Time City.
Wait until the
x
b
Left Dial Hands complete their move
to the time in the currently selected World Time
City. You will not be able to perform step 2 of this
procedure until the hands stop moving.
Hold down 2. B for about three seconds until the watch
beeps.
This will make the World Time City ( x NYC in this
example) your new Home City. At the same time, it will
change the Home City you had selected prior to step 2
(TYO in this example), to your new World Time City
.

@
*
5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

casio-5245---g-1400

Suche zurücksetzen

  • Sehr geehrte Damen und Herren,
    meine Casio 5245 - G-1400 geht seit einiger Zeit um 2 Minuten nach. Leider finde ich keine Anleitung in Deutsch, die mir Hilfe zum Einstellen der genauen Zeit gibt. Vielleicht können Sie mir behilflich sein. Vielen Dank im voraus.
    Mit freundlichen Grüßen ... Georg Utzmann Eingereicht am 25-4-2022 17:22

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5245 - G-1400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info