Bedienungsanleitung Casio 5283 (Seite 2 von 5) (Englisch)

624960

Zoom out

Zoom in

Vorherige Seite

1/5

Nächste Seite

Operation Guide 5283/5332

E-19

When the timekeeping setting you want to change is ﬂ ashing, use 3. D and/or B

to change it as described below.

Screen To do this: Do this:

Reset the seconds to 00

Press D.

Toggle between Daylight Saving Time (ON)

and Standard Time (OFF)

Press D.

Change the city code

Use D (East) and B (West).

Change the hour or minute

Use D (+) and B (–).

Toggle between 12-hour (12H) and 24-hour

(24H) timekeeping

Press D.

Change the year, month, or day

Use D (+) and B (–).

Press 4. A to exit the setting mode.

E-18

Press 2. C to move the ﬂ ashing in the sequence shown below to select the other

settings.

Seconds

DST

Home City Code

Hour

Minutes

Illumination Duration

Day

Month

Year

12/24-Hour Format

The following steps explain how to conﬁ gure timekeeping settings only. •

E-17

Adjusting the Digital Time and Date Settings

Use the procedure below to adjust the digital time and date settings.

Note

After adjusting the digital time and date setting, be sure to adjust the analog hands •

so the settings match.

See “Adjusting the Analog Hand Setting” (page E-36). •

To conﬁ gure the digital time and date settings

In the Timekeeping Mode, hold down 1. A for about two

seconds until the seconds start to ﬂ ash. This is the

setting mode.

Seconds

E-16

To change the Daylight Saving Time (summer time) setting

In the Timekeeping Mode, hold down 1. A for about two

seconds until the seconds start to ﬂ ash. This is the

setting mode.

Press 2. C to display the DST setting mode.

Press 3. D to toggle between Daylight Saving Time (On)

and Standard Time (OFF).

After the setting is the way you want, press 4. A to

return to the Timekeeping Mode.

The • DST indicator appears to indicate that Daylight

Saving Time is turned on.

DST indicator

E-15

Press 2. C twice to move the ﬂ ashing to the city code.

For details about city codes, see the “City Code •

Table” at the back of this manual.

Press 3. D (East) and B (West) to select the city code

you want to use as your Home City.

Keep pressing • D or B until the city code you want

to select as your Home City appears on the display.

After the setting is the way you want, press 4. A to

return to the Timekeeping Mode.

Note

After you specify a city code, the watch will use UTC* offsets in the World Time •

Mode to calculate the current time for other time zones based on the current time

in your Home City.

Coordinated Universal Time, the world-wide scientiﬁ c standard of timekeeping. *

The reference point for UTC is Greenwich, England.

City Code

E-14

Conﬁ guring Home City Settings

There are two Home City settings: actually selecting the Home City, and selecting

either standard time or daylight saving time (DST).

Note

After conﬁ guring Home City and/or Daylight Saving Time •

(summer time) settings, be sure to adjust the analog

hands to match the digital settings.

See “Adjusting the Analog Hand Setting” (page E-36). •

To conﬁ

gure Home City settings

In the Timekeeping Mode, hold down 1. A for about two

seconds until the seconds start to ﬂ ash. This is the

setting mode.

The watch will exit the setting mode automatically if •

you do not perform any operation for about two or

three minutes.

Seconds

E-13

Timekeeping

Use the Timekeeping Mode to set and view the current

time and date.

Each press of • D cycles the digital display contents as

shown below.

Day of the Week Month-Day Hour : Minutes Seconds

D D D

PM indicator

Hour

Day of week

Minutes

E-12

General Functions (All Modes)

The functions and operations described in this section can be used in all of the

modes.

Auto Return Features

If you leave a setting mode with ﬂ ashing digits on the display for two or three

minutes without performing any operation, the watch exits the setting mode

automatically.

Initial Screens

When you enter the World Time Mode or Alarm Mode, the data you were viewing

when you last exited the mode appears ﬁ rst.

Scrolling

The B and D buttons are used on the setting mode to scroll through data on the

display. In most cases, holding down these buttons during a scroll operation scrolls

through the data at high speed.

E-11

Hand Setting Mode

Stopwatch Mode Alarm Mode

C C

E-10

Selecting a Mode

Press • C to cycle between the modes as shown below.

In any mode (except when a setting mode, with ﬂ ashing digits is on the display), •

press B to illuminate the display.

Timekeeping Mode

World Time Mode Countdown Timer Mode

C C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5283 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5283

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info