624488

Casio 5369 - MTG-S1000 Seite 6

6
Zoom out
Zoom in
Vorherige Seite
1/8
Nächste Seite
Operation Guide 5369 (MTG)
E-47
To adjust the hand and day home positions
Important!
x You do not need to perform the procedure in this section if the watch is indicating the time and/or day
correctly.
1. In any mode, pull the crown out to the second click.
2. Hold down B until the watch beeps and the
x
Second Hand
moves to 12 o’clock. This takes about fi ve seconds.
x Release B when the
x
Second Hand gets to 12 o’clock. At this
time the watch will start automatic adjustment of the
x
Second
Hand,
c
Minute Hand, and
z
Hour Hand positions.
x Adjustment is complete when the
x
Second Hand,
c
Minute
Hand, and
z
Hour Hand move to 12 o’clock.
3. Press C.
x This will cause the
z
Hour Hand and
.
Day Indicator to move.
x Wait until the
.
Day Indicator stops at a position halfway
between 31 and 1.
x If the
.
Day Indicator is not halfway between 31 and 1, rotate
the crown until it is.
x Rotating the crown causes the
z
Hour Hand to move in 12-
hour increments, and the
.
Day Indicator to move in half-day
increments.

B +@
E-46
Hand/Day Adjustment Steps
For full details, see the procedure from page E-47 to E-48.
Pull crown out to second click.
x
Second Hand
c
Minute Hand
z
Hour Hand
.
Day Indicator
n
Small Hour Hand
B
C
C
C
(Until
x
Second Hand indicates 12 o’clock)
C
b
Small Minute Hand
,
Lower Dial Hand
Auto Adjustment
Manual Adjustment
x After completing adjustment, push the crown back in. Pushing the crown back in part way through
adjustment will return to the mode you started from with any adjustments you made in effect.
E-45
Adjusting the Hand and Day Home Positions
If the watch is exposed to strong magnetism or impact, it can cause its hands and/or the date to go out of
alignment. This can result in incorrect date and/or time indication even though a time calibration signal is
being received.
The watch automatically adjusts the
x
Second Hand,
c
Minute Hand, and
z
Hour Hand positions
periodically. You also can trigger hand position adjustment manually, if you want.
x The
v
Hour Hand (24-hour) is adjusted simultaneously with the
z
Hour Hand.
If you notice that the
b
Small Minute Hand,
n
Small Hour Hand,
m
Small Hour Hand (24-hour),
,
Lower
Dial Hand, or
.
Day Indicator are not in the correct position, perform manual adjustment.
x The
m
Small Hour Hand (24-hour) is adjusted simultaneously with the
n
Small Hour Hand.
E-44
5. Push the crown back in.
x The alarm always works based on the time kept by the watch.
To turn the alarm on or off
In the Alarm Mode, press A to toggle the alarm between on and off. The
,
Lower Dial Hand will indicate
the current ON/OFF setting.
To stop the alarm
Press any button.
E-43
To change the alarm time setting
1. In the Alarm Mode, pull out the crown to the fi rst click.
x If you do not perform any operation with the crown for about two minutes after pulling it out, crown
operations will become disabled and the watch hands will no longer move when you rotate the
crown. If this happens, push the crown back in and then pull it out again.
2. Rotate the crown to set the alarm time minute.
x A high-speed movement feature (one full cycle maximum) is available in steps 2 and 4 when
adjusting the hands. See “Crown Operations” (page E-3).
3. Press C.
x This causes the
n
Small Hour Hand to move.
4. Rotate the crown to set the alarm time hour.
x Movement of the
m
Small Hour Hand (24-hour) is synchronized with movement of the
n
Small Hour
Hand.
x The 12 o’clock position of the
m
Small Hour Hand (24-hour) indicates 24:00, while the 6 o’clock
position indicates 12:00.
Note
x Each press of the C button toggles between the alarm time minute setting and the hour setting.
C
Minute Hour
x Selecting the minute setting causes the
b
Small Minute Hand to move slightly. Selecting the hour
setting causes the
n
Small Hour Hand to move slightly.
E-42
Using the Alarm
When the alarm is turned on, an alarm will sound for about 10 seconds each day when the current time
kept by the watch reaches the preset alarm time. This is true even if the watch is not in the Alarm Mode.
Hand Functions
z
z Hour Hand
x
x Second Hand
c
c Minute Hand
v
v Hour Hand (24-hour)
b
b Small Minute Hand: Indicates the currently set alarm time minute.
n
n Small Hour Hand: Indicates the currently set alarm time hour.
m
m Small Hour Hand (24-hour): Indicates the currently set alarm time in 24-
hour format.
,
, Lower Dial Hand: Indicates the current alarm ON/OFF setting.
To enter the Alarm Mode
Refer to the Mode Reference Guide (page E-21).
x Entering the Alarm Mode will cause the
,
Lower Dial Hand to move to ON or OFF.

B + *> @
5 6
E-41
x Before starting a countdown timer operation, check to make sure that the countdown timer is not
already operating (indicated by a moving
b
Small Minute Hand). If it is, press A to stop it and then B
to reset to the countdown start time.
x Pulling out the crown while a countdown operation is in progress will stop the ongoing operation so you
can change the countdown start time setting.
To stop the alarm
Press any button.
E-40
To specify the countdown start time
1. In the Countdown Timer Mode, pull out the crown to the fi rst click.
x If you do not perform any operation with the crown for about two minutes
after pulling it out, crown operations will become disabled and the watch
hands will no longer move when you rotate the crown. If this happens,
push the crown back in and then pull it out again.
2. Rotate the crown to set the countdown start time.
x You can use high-speed movement (page E-3) when performing the above
step.
x To set a start time of 60 minutes, position the
n
Small Hour Hand at
12 o’clock and the
m
Small Hour Hand (24-hour) at 6 o’clock. To set
a start time of 120 minutes, position the
n
Small Hour Hand and the
m
Small Hour Hand (24-hour) at 12 o’clock.
3. Push the crown back in.
To perform a countdown timer operation
A
A B
Start Stop Reset
x Pressing B while the Countdown Timer is stopped resets the displayed time to the start time specifi ed
by you.
x Pressing B will not perform a reset while the hands are moving to the current timer time after you enter
the Countdown Timer Mode.

*
5 6
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5369 - MTG-S1000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio 5369 - MTG-S1000

Casio 5369 - MTG-S1000 Bedienungsanleitung - Deutsch - 8 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info