Bedienungsanleitung Casio 5398 - GA-400 (Seite 4 von 6) (Englisch)

624815

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

Operation Guide 5398

E-39

Countdown in Progress

Display: TMR

Timer hand:

Indicates remaining time.

Rotates counterclockwise.

Countdown Complete

Display: OVER

Timer hand:

Indicates elapsed time.

Rotates clockwise.

E-38

To conﬁ gure the countdown timer

1. Rotate the rotary switch to adjust the minutes setting.

• If a countdown timer operation is in progress, press

T to stop it and then press D to reset to the current

starting time.

• If a countdown timer operation is paused, press D to

reset to the current starting time.

To perform a countdown timer operation

T T T D

Start Stop (Resume) (Stop) Reset

E-37

Countdown Timer

The countdown timer can be set within a range of

one minute to 60minutes. An alarm sounds when

the countdown reaches zero. When the end of the

countdown is reached, the timer starts to count up and

continues timing up to 60minutes.

To enter the Countdown Timer Mode

Use C to select the Countdown Timer Mode as shown

on page E-11.

Minutes

Timer hand

Seconds

E-36

To turn an alarm and the Hourly Time Signal on and off

In the Alarm Mode, rotate the rotary switch to select an

alarm or the Hourly Time Signal.

• When the alarm you want or the Hourly Time Signal

is displayed, press T to toggle it between on

(“

” displayed) and off (“ ” displayed).

• The alarm on indicator (when any alarm is on), snooze

alarm indicator (when the snooze alarm is on), and the

Hourly Time Signal on indicator (when the Hourly Time

Signal is on) are shown on the display in all modes.

To stop the alarm

Press any button.

Hourly time signal

on indicator

Snooze alarm on indicator

E-35

2. Hold down A for about two seconds until the alarm time starts to ﬂ ash. This is

the setting mode.

3. Press C to move the ﬂ ashing to the setting you want to change.

• When both the hour and minute setting is ﬂ ashing: the hour setting will change

automatically as you change the minute setting in the next step.

• When just the hour setting is ﬂ ashing: just the hour setting will change in the

next step.

4. Rotate the rotary switch to change the currently ﬂ ashing setting.

• When setting the alarm time using the 12-hour format, take care to set the time

correctly as a.m. (no indicator) or p.m. (P indicator).

5. Press A to exit the setting mode.

To test the alarm

In the Alarm Mode, hold down T to sound the alarm.

E-34

To enter the Alarm Mode

Use C to select the Alarm Mode as shown on page E-11.

• The snooze alarm screen is indicated by SNZ, while the other alarm screens are

numbered

AL1 through AL4. The Hourly Time Signal screen is indicated by SIG.

• When you enter the Alarm Mode, the data you were viewing when you last exited

the mode appears ﬁ

rst.

To set an alarm time

1. In the Alarm Mode, rotate the rotary switch to scroll

through the alarm screens until the one whose setting

you want to change is displayed.

AL1 AL3AL2

SNZSIG AL4

Alarm indicator

Alarm ON/OFF indicator

E-33

Using the Alarm

You can set ﬁ ve independent daily alarms. When a daily

alarm is turned on, an alarm tone will sound for about

10seconds each day when the time in the Timekeeping

Mode reaches the preset alarm time. One of the alarms

is a snooze alarm, while the other four are one-time

alarms. The snooze alarm operation will repeat every ﬁ ve

minutes, up to seven times.

You can also turn on an Hourly Time Signal, which will

cause the watch to beep twice every hour on the hour.

Alarm number

Alarm time (Hour : Minute)

E-32

To swap your Home City and World Time City

In the World Time Mode, hold down T for at least three seconds.

This will swap your Home City and World Time City.

Example: To swap the Home City (TYO) and World Time City (NYC)

T, at least 3 seconds

World Time City (NYC) time New World Time City (TYO)

E-31

To specify standard time or daylight saving time (DST) for a city

1. In the World Time Mode, rotate the rotary switch to

display the city code (time zone) whose Standard

Time/Daylight Saving Time setting you want to change.

2. Hold down A for about two seconds.

• This toggles the city code you selected in step1

between Daylight Saving Time (DST indicator

displayed) and standard time (DST

indicator not

displayed).

• Note that you cannot switch between standard time/

daylight saving time (DST) while UTC is selected as

the World Time City.

• The standard time/daylight saving time (DST) setting

affects only the currently displayed city. Other cities

are not affected.

DST indicator

E-30

To enter the World Time Mode

Use C to select the World Time Mode as shown on page E-11.

To view the time in another time zone

In the World Time Mode, rotate the rotary switch to change the city code setting.

• To display the UTC city code (differential 0), hold down D.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5398 - GA-400 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5398 - GA-400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info