Bedienungsanleitung Casio 5411 - MRG-G1000 (Seite 9 von 14) (Englisch)

624489

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Adjusting Time

Settings Manually

You can use the procedure below to adjust the

watch’s time and day settings when GPS and

time calibration signal reception is not

possible for some reason.

Selecting a Time Zone

Use the procedure in this section to select a

city (time zone) to use as your Home City. If

you

are in an area that observes summer time,

you can also enable or disable summer time.

Note

●

The initial factory default summer

time setting for all cities (time zones)

is “AT (AUTO)”. With this setting, the

watch automatically switches

between summer time and standard

time as required. The “AT (AUTO)”

setting lets you use the watch

without worrying about changing the

summer time setting.

●

When performing a manual

operation to select a time zone for

which there is no city name

displayed, use “STD” or “DST” for

the summer time setting.

●

In the cases described below,

receiving GPS position information

will automatically cause “AT

(AUTO)” to be selected for the

summer time setting.

ー

When

the time zone of the current

receive operation is different from

the watch’s time zone setting prior

to the receive operation.

ー

When the time zone is

unchanged, but the acquired

position information is for a

geographic area with different

summer time rules (start date, end

date)

Pull out the crown to the second click.

The second hand will move to the

currently selected time zone.

Crown

Time zone

Rotate

the crown to change the time zone.

●

You can also select a time zone whose

name

is not indicated on the face of the

watch.

●

For information about time zones, see

the “City (Time Zone) List”.

Hold down (A) for about one second to

change the summer time setting.

●

Each press of (A) cycles through

available settings in the sequence

shown below.

“AT (AUTO)” n “STD” n “DST”

●

“AT (AUTO)”

The watch switches between standard

time and summer time automatically.

●

“STD”

The watch always indicates standard

time.

●

“DST”

The watch always indicates summer

time.

Push the crown back in to its normal

position.

Summer Time

Summer time, which is also known as Daylight

Saving

Time (DST), advances the time setting

one hour, 30 minutes, or some other amount

of time from standard time (STD) during the

summer months. Whether or not and how

summer time is used depends on your country

or local area. Summer time is not used in some

countries and local areas.

Adjusting the Time and Day

Setting

Pull out the crown to the second click.

The second hand will move to the

currently selected time zone.

Hours

Minutes

Crown

Time zone

Hold down (C) for about 10 seconds.

This causes the second hand to move to

12 o’clock and enables the hour and

minute setting operation.

Rotate the crown to adjust the hour and

minute settings.

Press (C).

This enables the year 10’s digit setting

operation.

Year (10’ s digit)

Rotate the crown to move the second

hand to the desired setting for the year

ten’s digit.

Operation Guide 5411

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5411 - MRG-G1000 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5411 - MRG-G1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info