Bedienungsanleitung Casio 5412 - OCW-G1000 (Seite 7 von 12) (Englisch)

624832

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Rotate the

crown to change the time zone.

The small hour hand and small minute

hand indicate the current time in the

selected time zone.

●

Hold down (B) for about one second to

display UTC (Coordinated Universal

Time) time.

Small

Minute

Hand

Small Hour Hand

Crown

Hold down the (A) button for about one

second to change the summer time

setting.

●

Each press of (A) cycles through

available settings in the sequence

shown below.

“AT (AUTO)” n “STD” n “DST”

●

“AT (AUTO)”

The watch switches between standard

time and summer time automatically.

●

“STD”

The watch always indicates standard

time.

●

“DST”

The watch always indicates summer

time.

Push the crown back in.

Note

●

When a time zone for which there is

no city name displayed is selected,

use “STD” or “DST” for the summer

time setting.

●

You cannot switch between “STD”

and “DST” while “UTC” is selected

as the Home City (time zone).

Stopwatch

The stopwatch measures elapsed time in units

of 1/20 (0.05) seconds up to 23 minutes, 59.95

seconds (24 minutes).

Getting ready

Enter the Stopwatch Mode.

l Navigating Between Modes

Measuring Elapsed Time

Mode hand

Stopwatch

1/20 (0.05)-second

Stopwatch minutes

and seconds

Use the operations below to measure

elapsed time.

Stop

Resume

Stop

Start

●

The stopwatch 1/20 (0.05)-second

hand will move for the first 30 seconds

after an elapsed time measurement

operation is started, and then stop.

When the elapsed time measurement

operation is stopped, the hand will

move to the appropriate position to

indicate the final 1/20 (0.05)-second

count.

Press (B) to reset the stopwatch.

Press (C) to return to the Timekeeping

Mode.

Adjusting Time

Settings Manually

You can use the procedure below to adjust the

watch’s

time and day settings when GPS and

time calibration signal reception is not

possible for some reason.

Selecting a Time Zone

Use the procedure in this section to select a

city (time zone) to use as your Home City. If

you are

in an area that observes summer time,

you can also enable or disable summer time.

Note

●

The initial factory default summer

time setting for all cities (time zones)

is “AT (AUTO)”. With this setting, the

watch automatically switches

between summer time and standard

time as required. The “AT (AUTO)”

setting lets you use the watch

without worrying about changing the

summer time setting.

●

When performing a manual

operation to select a time zone for

which there is no city name

displayed, use “STD” or “DST” for

the summer time setting.

●

In the cases described below,

receiving GPS position information

will automatically cause “AT

(AUTO)” to be selected for the

summer time setting.

ー

When

the

time zone of the current

receive operation is different from

the watch’s time zone setting prior

to the receive operation.

ー

When the time zone is

unchanged, but the acquired

position information is for a

geographic area with different

summer time rules (start date, end

date)

Operation Guide 5412

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio 5412 - OCW-G1000 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio 5412 - OCW-G1000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info