E-16
5. After all of the settings are the way you want, press
A
to exit the setting screen.
• The DST ind
Note
• Af
the cu
* Coordinated Universal Time, the world-wide scientifi
The reference point for UTC is Greenwich, England.
To change the daylight saving time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears on the display.
• Wh
A
(afADJ appe
selected city code.
2. Press
D
.
• This willDST indic
currently selected
3. Press
E
to toggle the DST setting between daylight saving time (
ON
)
and standard time (
OFF
).
4. After all of the settings are the way you want, press
A
to exit the
setting screen.
• The DST ind
is tur
DST indicator
E-17
Confi
You can use the procedure below to adjust the Timekeeping Mode time and date settings if they are off.
Changing the digital Home City data should cause the analog time setting to change accordingly. If the
analog time does not indicate the digital time, check the home positions of the hands and make
adjustments if necessary (page E-20).
To change the current time and date settings
1. In the Timekeeping Mode, hold down
A
until
ADJ
appears on the display.
• Wh
A
(afADJ appe
selected city code.
City code
E-18
2. Press
D
to move the fl
City Code
(page E-15)
DST
(page E-16)
Illumination Duration
(page E-61)
Button Operation Tone
On/Off (page E-65)
Day Month
12/24-Hour
Format
Seconds Hour
Year
Minutes
• Th
3. When the timekeeping setting you want to change is fl
E
and/or
B
to change it as
described below.
Screen To do this: Do this:
Toggle between 12-hour (
12H
) and 24-hour (
24H
)
timekeeping.
Press
E
.
Reset the seconds to
00
(If the current seconds count is between 30 and 59,
one is added to the minute count).
Press
E
.
Change the hour or minutes
Use
E
(+) and
B
(–).
Change the year
Change the month or day
E-19
4. After all of the settings are the way you want, press
A
to exit the setting screen.
Note
• For i
Home C
• Whi P (PM) i
no
time is dP (PM) indicator.
• The wa
year
watch’s bat
• The d
date and
• Refe
- Button operation tone on/off: “To enable or disable the button operation tone” (page E-65)
- Illumination duration setting: “To change the illumination duration” (page E-61)
E-20
Hand Home Position Adjustment
Strong magnetism or impact can cause the hands of the watch to go out of alignment.
• Home position adjustment is not necessary when the analog time and digital time are the same time in
the Timekeeping Mode.
To adjust home positions
1. In the Timekeeping Mode, hold down
A
and keep it depressed for
about fi
H.SET
appears on the display.
• Wh
A
afH.SET appears, the
move to 12 o’cloc
indi
• ThougADJ will app
af
A
, do no
depressed untilH.SET appears.
• Ho
sec
(mode h
2. Use
D
to select the hand (s) you want to adjust.
• The s
Display Selected hand
Flashing
00
Second hand
Flashing
0:00
Hour and minute hands
Flashing
SUB 1
Dial Hand 1 (Mode Hand)
Flashing
SUB 2
Dial Hand 2 (Tide Graph)
Dial Hand 2 Dial Hand 2
E-21
• If th
• The watch will return to regular timekeeping automatically if you do not perform any operation for
about two or three minutes. Any changes you have made to settings up to that point will be saved.
3. Use
E
(+) and
B
(–) to adjust the position of the currently selected hand.
• Ho
hand m
pres
• The second hand and dial hands will automatically stop high-speed movement after they complete
one revolution. The minute hand will stop automatically after 12 revolutions.
4. Press
A
to exit home position correction and return to regular timekeeping.
Note
After performing home position adjustment, check to make sure that the analog hands and the display
indicate the same time. If they do not, perform home position adjustment again.
E-22
Using the Digital Compass
You can use the Digital Compass Mode to determine the direction of north, and to check your bearing to a
destination.
• For information about what you can do to improve digital compass reading accuracy, see “Calibrating
the Bearing Sensor” (page E-25) and “Digital Compass Precautions” (page E-32).
To perform a digital compass operation
1. Place the watch on a fl
(in relation to the horizon).
2. Point the 12 o’clock position of the watch in the direction you want to check.
3. In any mode (except a setting mode), press
C
to perform a digital compass operation.
• This will causeCOMP.
• Af
disp
• Press
A
to togg
E-23
315°
0°
Objective Bearing Angle
Meaning
N: North
E: East
W: West
S: South
Bearing to Objective:
Northwest
Bearing Angle to
Objective
North
• Se
indic
4. To return to the mode you were in immediately before entering the Digital Compass Mode, press
D
.
To enter the Timekeeping Mode, hold down
D
for at least two seconds.
Operation Guide 5442 5443
