633318

Casio 5444 Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
Operation Guide 5444
E-39
Countdown Timer Mode
C
Alarm Mode Stopwatch Mode
C
C
E-38
Selecting a Mode
x The illustration below shows which buttons you need to press to navigate between
modes.
x To return to the Timekeeping Mode from any other mode, hold down C for at
least four seconds.
Timekeeping Mode World Time Mode
C C
E-37
Mode Reference Guide
Your watch has “fi ve modes”. The mode you should select depends on what you
want to do.
To do this: Enter this mode: See:
x View the current date in the Home City
x Confi gure Home City and daylight saving time (DST)
settings
x Confi gure time and date settings manually
x Perform a time calibration receive operation
x Check whether the last receive operation was successful
x Switch between 12-hour and 24-hour timekeeping
x Display an alarm countdown
Timekeeping Mode
E-41
View the current time in one of 48 cities (31 time zones)
around the globe
World Time Mode E-53
Use the stopwatch to measure elapsed time Stopwatch Mode E-57
Use the countdown timer Countdown Timer Mode E-60
Set an alarm time Alarm Mode E-63
E-36
x The receive operation is disabled under any of the following conditions.
− While power is at Level 3 (L) or lower (page E-15)
− While the watch is in the power recovery mode (page E-17)
− When the watch is in the function sleep state (“Power Saving”, page E-19)
− While a countdown timer operation is in progress (page E-60)
− While the hands are in positions to allow easier viewing of the digital dials (page E-79)
x A receive operation is cancelled if an alarm sounds while it is being performed.
x The Home City setting reverts to the initial default of TYO (Tokyo) whenever the
battery power level drops to Level 5 or when you have the rechargeable battery
replaced. If this happens, change the Home City to the setting you want (page E-42).
E-35
4. Press A to exit the setting mode.
x Exiting a setting mode will normally cause the hands to return to regular
timekeeping automatically. However, if you manually move the hands (page
E-79) and then enter a setting mode, they will not return to regular timekeeping
automatically when you exit the setting mode. In this case, you will need to
return the hands to their normal positions manually (page E-80).
Radio-controlled Atomic Timekeeping Precautions
x Strong electrostatic charge can result in the wrong time setting.
x Even if a receive operation is successful, certain conditions can cause the time
setting to be off by up to one second.
x The watch is designed to update the date and day of the week automatically for
the period January 1, 2000 to December 31, 2099. Updating of the date by signal
reception will no longer be performed starting from January 1, 2100.
x If you are in an area where signal reception is not possible, the watch keeps time
with the precision noted in “Specifi
cations” (page E-92).
E-34
To turn auto receive on and off
1. In the Timekeeping Mode, press D (page E-41).
2. Hold down A until the current auto receive setting
(On or OFF) and RCVD indicator start to fl ash. This is
the setting mode.
x Whenever you enter the setting mode, the analog
hands will automatically move to positions that allow
easier viewing of the digital dials.
x Note that the watch will not enter the setting mode if
the currently selected Home City is one that does not
support time calibration reception.
3. Press D to toggle between auto receive on (On) and
off (OFF).
RCVD indicator
On/Off status
E-33
To check the latest signal reception results
In the Timekeeping Mode, press D (page E-41).
x When receive is successful, the left digital dial shows
the time and date that receive was successful. - : - -
indicates that none of the receive operations were
successful.
x To return to the Timekeeping Mode, press D.
Note
x RCVD will not be displayed in the right digital dial if you
have adjusted the time or date setting manually since
the last receive operation.
E-32
Signal Level Indicator
During manual receive, the lower digital dial shows a
signal level indicator as shown below.
Weak
(Unstable)
Strong
(Stable)
As you watch the indicator, keep the watch in a location
that best maintains stable reception.
x Even under optimum reception conditions, it can take
about 10 seconds for reception to stabilize.
x Note that weather, the time of day, surroundings, and
other factors all can affect reception.
Signal level indicator
E-31
x If the current reception fails but a previous reception
(within the last 24 hours) was successful, the right
digital dial will show RCVD and ERR. If only ERR
is displayed (without RCVD), it means that all of
the receive operations over the past 24 hours have
failed. The watch will return to the Timekeeping Mode
without changing the time setting if you press D or
if you do not perform any button operation for about
one or two minutes.
Note
x To interrupt a receive operation and return to the
Timekeeping Mode, press any button.
If there was a previously
successful reception
Receive failed
E-30
x If the receive operation is successful, the reception
date and time appear in the left digital dial. The watch
will return to the Timekeeping Mode if you press D or
if you do not perform any button operation for about
one or two minutes.
Receive successful
… 4 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

casio-5444

Suche zurücksetzen

  • 5444 stellt sich nicht auf die eingestellte zeit ein Eingereicht am 16-2-2023 14:10

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Casio 5444 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Casio 5444

Casio 5444 Bedienungsanleitung - Deutsch - 10 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info