Bedienungsanleitung Casio AP-400 (Seite 32 von 37) (Englisch)

586713

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

E-28

Reference

Troubleshooting

Problem Cause Action See Page

No sound is

produced when I

press a keyboard

key.

1. The VOLUME controller is set to

“MIN”.

1. Rotate the VOLUME controller more

towards “MAX”.

) E-6

2. Headphones are connected to the

digital piano.

2. Unplug the headphones from the

digital piano.

) E-5

3. MIDI Local Control is turned off. 3. Turn on the Local Control setting. ) E-22

The pitch of the

digital piano is off.

1. The digital piano’s key setting is

something other than “0”.

1. Change the key setting to “0”, or turn

digital piano power off and then back

on again.

) E-21

2. Digital piano tuning is incorrect. 2. Adjust digital piano tuning, or turn the

digital piano off and then back on

again.

) E-21

No sound is

produced when I try

to play back a built-in

song or a recorded

song.

1. The VOLUME controller is set to

“MIN”.

1. Rotate the VOLUME controller more

towards “MAX”.

) E-6

2. Headphones are connected to the

digital piano.

2. Unplug the headphones from the

digital piano.

) E-5

When I play

something on the

digital piano, my

connected external

MIDI sound source

does not sound.

1. The digital piano’s send channel is

different from the send channel of the

external MIDI sound source.

1. Change the send channel settings of

the digital piano and/or the external

MIDI sound source so they are the

same.

) E-22

2. The volume or expression setting of

the external sound source is “0”.

2. Adjust the volume and expression

settings of the external sound source.

) External

sound

source

user’s guide

Buttons do not

operate.

Operation Lock is turned on. Turn off Operation Lock or turn the digital

piano off and then back on again.

) E-22

Tone, tempo and

other settings are not

initialized when the

digital piano is

turned on.

Setup Memory is turned on. Turn off Setup Memory. ) E-22

A tone’s quality and

volume sounds

slightly different

depending where it is

played on the

keyboard.

This is an unavoidable result of the digital sampling process,*

and does not indicate malfunction.

* Multiple digital samples are taken for the low range, middle range, and high range of the original

musical instrument. Because of this, there may be a very slight difference in tonal quality and

volume between sample ranges.

When I press a

button, the note that

is sounding cuts out

momentarily or there

is a slight change in

how effects are

applied.

This happens when the sounds of multiple parts are sounding at the same time while using layer,

using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of these

conditions exists will cause the effect setting that is built into the tone to change automatically, which

causes the notes to cut out momentarily or causes a slight change in how effects are being applied.

AP400_e.book 28 ページ２００８年４月１５日　火曜日　午後１２時３０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP-400 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info