Bedienungsanleitung Casio AP-6 (Seite 10 von 79) (Englisch)

466797

Zoom out

Zoom in

Vorherige Seite

1/79

Nächste Seite

E-6

Connections

IMPORTANT!

• Before connecting headphones, be sure to use the

Digital Piano’s VOLUME controller to turn the

volume down to a low level. After connecting, you

can adjust the volume to the level you want.

• The Digital Piano automatically adjusts sound output

to optimize for headphones (when headphones are

connected) or the built-in speakers (when

headphones are not connected).

Connect commercially available headphones to the

PHONES jacks. Connecting headphones to either of

the PHONES jack cuts off output to the speakers,

which means you can practice even late at night

without bothering others. To protect your hearing,

make sure that you do not set the volume level too high

when using headphones.

NOTE

•Be sure to push the headphones plug into the

PHONES jacks as far as it will go. If you don’t, you

may hear sound from only one side of the

headphones.

•If the plug of the headphones you are using does not

match the PHONES jacks, use the applicable

commercially available adaptor plug.

•If you are using headphones that require an adaptor

plug, make sure you do not leave the adaptor

plugged in when you unplug the headphones. If you

do, nothing will sound from the speakers when you

play.

You can connect audio equipment or a music amplifier

to the Digital Piano and then play through external

speakers for more powerful volume and better sound

quality.

IMPORTANT!

• The Digital Piano automatically adjusts sound output

to optimize for headphone output (when headphones

are connected) or built-in speaker output (when

headphones are not connected). This also will cause

a change in the output quality from the Digital

Piano’s LINE OUT R and L/MONO jacks.

• Whenever connecting a device to the Digital Piano,

first use the VOLUME controller to set the volume to

a low level. After connecting, you can adjust the

volume to the level you want.

• Whenever you connect any device to the Digital

Piano, be sure to read the user documentation that

comes with the device.

Playing Output from External Equipment

through the Piano’s Speakers 

Use commercially available cables to connect the

external audio equipment to the piano’s LINE IN jacks

as shown in Figure .

LINE IN R jack input sounds through the piano’s right

speaker, while LINE IN L/MONO jack input sounds

through the left speaker. Connecting to the LINE IN

L/MONO jack only causes the same output to be

produced from both speakers. It is up to you to

purchase connecting cables that are compatible with

the equipment you are connecting.

Connecting Headphones

PHONES jacks

Bottom

Stereo standard plug

Connecting Audio Equipment

or an Amplifier

INPUT 1

INPUT 2

Guitar amplifier

Keyboard amplifier, etc.

Standard plug

Standard jack

LEFT (White)

RIGHT (Red)

Portable audio player, etc.

Audio amplifier AUX IN jack, etc.

Pin plug

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP-6 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AP-6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info