Bedienungsanleitung Casio AP24 (Seite 21 von 36) (Englisch)

27153

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

E-17

To record to one track while playing

back from the other track

This procedure is basically the same as that under “To record

notes from the keyboard” on page E-16.

Example: To play back Track A while recording to Track B

Select the track you want to play back.

• While holding down the CONTROL button, press the

RECORD button as many times as necessary so the

Track A indicator lamp is lit.

Press the RECORD button to enter record standby.

• This causes the Track A lamp to flash. While holding

down the CONTROL button, press the RECORD

button so the Track B indicator lamp is flashing.

Start recording.

• Press the START/STOP button to start recording to

Track B as Track A plays back. Play in time with the

playback from Track A.

MEMO

• You can adjust the tempo and beat during record

standby. Playback, however, is performed using the

tempo and beat that was selected when Track A was

selected.

Playback

Use the following procedure to play back from memory.

To playback from memory

Select the track(s) you want to play back.

• While holding down the CONTROL button, press the

RECORD button. Each press of the RECORD button

causes the indicator lamps to cycle between the three

states shown below.

• A track whose indicator lamp is lit is in playback

standby.

• If you want to play back both tracks, both of the

RECORD button’s indicator lamps should be lit.

420A-E-021A

Using the Memory

Press the START/STOP button to start playback.

• You can toggle the playback metronome sound on and

off by pressing the METRONOME button.

• Playback stop automatically when the end of the tune

is reached.

• To stop part way through, press the START/STOP

button.

• To stop the metronome, press the METRONOME

button.

NOTE

• You can change the playback tempo while playing back

from memory.

• You cannot change the tone when playing back from

memory.

Deleting Memory Contents

IMPORTANT!

• The delete operation cannot be undone. Make sure you

play back song memory contents and confirm that you

no longer need it before performing the following

procedure.

To delete the contents of a specific track

Enter record standby.

• While holding down the CONTROL button, press the

RECORD button. Each press of the RECORD button

causes the indicator lamps to toggle between the two

states shown below. Make sure that the indicator lamp

for the track whose contents you want to delete is

flashing.

Press the START/STOP button twice to delete the

contents of the selected track.

To delete the contents of both tracks

Hold down the RECORD button for at least two

seconds, until the indicator lamps of both tracks

start to flash.

• This indicates that the contents of both tracks have

been deleted.

Track A

Indicator

Lamp Lit

Track B

Indicator

Lamp Lit

Both

Indicator

Lamp Lit

Track A

Indicator Lamp

Flashing

Track B

Indicator Lamp

Flashing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP24 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AP24

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info