Bedienungsanleitung Casio AP31 (Seite 28 von 50) (Englisch)

27155

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

E-24

427B-E-028A

Turning Local Control On and Off

This setting effectively determines whether or not the key-

board and pedals of the CELVIANO are connected to the

CELVIANO’s sound source, as illustrated below.

When Local Control is on (the normal setting), anything

played on the keyboard is sounded by the internal sound

source and simultaneously output from the MIDI OUT ter-

minal. When off, anything played on the keyboard is output

from the MIDI OUT terminal only, without being sounded

by the sound source.

Local Control can be turned off when you are using the

CELVIANO as the sound source of a connected sequencer or

other device, and you want to guard against sound being

produced should the CELVIANO keyboard be pressed acci-

dentally.

To turn Local Control on and off

While still holding down the CONTROL button,

switch Local Control on and off by pressing one of

the keyboard keys illustrated below.

• A note does not sound when you press a keyboard key

while holding down CONTROL.

❚

NOTE

❚

• Note that no sound will be produced from the CELVIANO’s

speakers if you press the keyboard while Local Control is turned

off.

• Local Control is turned on automatically whenever you turn on

CELVIANO power or play a demo tune.

OUT

MIDI

Local Control

Keyboard

Pedals

Sound source

OFF

General MIDI

The General MIDI System is a set of specifications for sound

generating devices agreed upon by world MIDI manufactur-

ers. These specifications were developed to allow the creation

of music data that is not limited to specific equipment mak-

ers and models. Among other things, General MIDI defines

the tone number sequence and the number of MIDI channels

that can be used. Any device equipped with a sound source

that supports General MIDI is able to produce sounds of sim-

ilar nuances, regardless of the manufacturer or model.

The Type 2 program change numbers of your CELVIANO as-

sign program numbers to tones so they comply with the Gen-

eral MIDI System.

Type 2 program change numbers make it possible to receive

General MIDI System data from a connected sequencer or

other device, and play it using the CELVIANO’s tones. Tone

switching is performed only when a program number that

corresponds to any of the CELVIANO’s non-bass tones is re-

ceived. No tone switching is performed when any other pro-

gram number is received.

The table on page E-23 shows the program number assign-

ments for Type 1 and Type 2.

To change the program change number type

While still holding down the CONTROL button, se-

lect the Program Change Mode by pressing one of

the keyboard keys illustrated below.

• A note does not sound when you press a keyboard key

while holding down CONTROL.

• See the table on page E-23 for detailed information about

Type 1 and Type 2.

A5: TYPE 2



5 (black key): TYPE 1

G5: ON



5 (black key): OFF

AP31/33_E_21_25.p65 03.10.7, 11:00 AMPage 24 Adobe PageMaker 6.5J/PPC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP31 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AP31

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info