Bedienungsanleitung Casio AP38 (Seite 17 von 54) (Englisch)

27171

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

E-13

428A-E-017A

Using Layer

With layer you can assign two different tones (a main tone

and a layered tone) to the keyboard, both of which play

whenever you press a key.

To layer two tones

❚

NOTE

• To use the variation tone for the main tone and/or the layer

tone, perform the required operation to turn on the variation

tone(s) before starting the procedure below.

While holding down the tone button of the main

tone, press the tone button for the layer tone.

• This causes the indicator lamp of the main tone button

to light, and the lamp of the layer tone button to flash.

• Whether the normal tone or variation tone is selected

for the main tone and layer tone depends on the

normal tone/variation tone setting of the tone button

you press. The indicator lamp above the VARIATION

button is lit when the variation tone is selected for

the main tone.

Now try playing something on the keyboard.

• Note should sound using both of the tones you

selected.

To cancel layering, press any tone button.

❚

NOTE

• If you change or turn off a digital effect while layering is turned

on, the setting you make is saved to the main tone’s settings

only.

• You cannot layer two tones that are assigned to the same tone

button (for example: ELEC PIANO 1 + ELEC PIANO 2, or

HARPSICHORD + VIBRAPHONE).

Main tone + Layered tone

How digital effects are applied when layering

is turned on

The following are the rules that determine what type of digital

effects are applied to two tones that are layered.

These conditions:

• Digital effects turned on

for the main tone

• Digital effects turned on or

off for the layered tone

• Digital effects turned off

for the main tone

• Digital effects turned on

for the layered tone

• Digital effects turned off

for the main tone

• Digital effects turned off

for the layered tone

Cause these digital effects to

be applied to both the main

tone and layered tone:

Main tone digital effects

Layered tone digital effects

None

To adjust the volume of the main tone

Hold down the CONTROL button, and keep it

depressed until you reach step 4 of this

procedure.

Press the GRAND PIANO 1 button.

• This causes the indicator lamp above the button to

flash.

Use one of the procedures below to set the main

tone volume to a value in the range of 40 to 127.

• To scroll the volume setting value: While holding

down the CONTROL button, use the + (increase) and

– (decrease) keys to scroll the volume setting value.

Holding down either key changes the setting at high

speed.

Pressing + and – at the same time automatically selects

a volume setting value of 127.

• To input the volume setting value: While holding

down the CONTROL button, use the number input

keys to input a two-digit or three-digit volume setting

value in the range of 40 to 127. You can input a two

digit or a three-digit value. The level you input is

applied to the volume setting value when you release

the CONTROL button. The volume setting does not

change if you input a one-digit value or a value that

is outside of the allowable range.

AP38_e_08-19.p65 02.6.12, 15:5513

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP38 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AP38

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info