Bedienungsanleitung Casio AP38 (Seite 25 von 54) (Englisch)

27171

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

E-21

Play something on the keyboard to start

recording.

• What you play sounds from the speakers and is

recorded into memory.

• You can also start recording by pressing PLAY/STOP.

In this case, blank space is inserted in memory from

the point that you press PLAY/STOP up to the point

you start to play on the keyboard.

• The indicator lamp above the RECORD button

changes from flashing to lit when recording starts.

After you are finished recording, press PLAY/

STOP to stop the record operation.

• At this time the indicator above RECORD goes out,

while the indicator above the recorded track remains

on.

• Here you can press PLAY/STOP and playback the

data you just recorded.

• To exit the song memory mode, press the SONG

MEMORY so its indicator lamp goes out.

To record to one track while playing

back from the other track

This procedure is basically the same as that under “To record

notes from the keyboard” on page E-20. The differences are

as described below.

Example: To play back Track A while recording to Track B

• Before starting step 2 of the procedure on page E-20, press

the TRACK A button so the indicator above it is lit.

• When you enter record standby, the indicator above the

TRACK A button remains lit, while the indicator above the

TRACK B button flashes. If the indicator above the TRACK

A button is flashing at this time, press the TRACK B button

so the indicator above it flashes.

• Performing step 4 of the procedure causes Track A play back

and Track B recording to start at the same time. Play on the

keyboard along with the playback of Track A.

• Once you enter record standby, you can also change the

tempo and beat settings. It should be noted, however, that

playback is performed following the last tempo and beat

settings that were used for recording in either of the tracks.

428A-E-025A

Playback

Use the following procedure to play back from song memory.

To play back from song memory

Press the SONG MEMORY button.

• This causes the indicator lamp above the button to

light.

Press the TRACK button of the track you want to

play back (A or B).

• This causes the indicator lamp above the button of

the track you select to light.

Press PLAY/STOP to start playback.

• You can toggle the playback metronome sound on and

off by pressing the METRONOME button.

• To stop the metronome, press the METRONOME

button.

• Playback stops automatically when the end of the tune

is reached.

• To stop part way through, press PLAY/STOP.

❚

NOTE

• If you want to playback song memory contents you have just

recorded, simply press PLAY/STOP.

• You cannot change the tone when playing back from song

memory.

• You can change the playback tempo while playing back from

song memory.

AP38_e_20-29.p65 02.6.12, 15:5521

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP38 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AP38

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info