Bedienungsanleitung Casio AP45 (Seite 48 von 53) (Englisch)

27175

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

A-6

MIDI Data Format

430A-E-090A

pp ....... Program Number = 00H to 7FH

Send

Program Change messages are sent when you select a tone on

the instrument.

Pitch Bend Change ★

Format

Byte 1 Byte 2

CnH ppH

n .........Voice Channel Number = 0H to FH (Ch1 to Ch16)

ll .........Pitch Bend Change LSB = 00H to 7FH

mm .... Pitch Bend Change MSB = 00H to 7FH

Byte 1 Byte 2 Byte 3

EnH llH mmH

Filter Cut Off Frequency

NRPN MSB = 01H

NRPN LSB = 20H

Data Entry MSB = mmH

mm .... Filter Cut Off Frequency = 00H to 40H to 7FH (-64 to 0 to

+63)

Recognition

When the instrument receives this message, the preset Filter Cut

off Frequency value for the tone is changed to the value that

corresponds to the data entry MSB of the received message. There

is no change when the value of the data entry MSB is 40H(0).

Filter Resonance

NRPN MSB = 01H

NRPN LSB = 21H

Data Entry MSB = mmH

mm .... Resonance= 00H to 40H to 7FH (-64 to 0 to +63)

Recognition

When the instrument receives this message, the preset Filter

Resonance value for the tone is changed to the value that

corresponds to the data entry MSB of the received message. There

is no change when the value of the data entry MSB is 40H(0).

Filter/AMP Envelope Attack Time

NRPN MSB = 01H

NRPN LSB = 63H

Data Entry MSB = mmH

mm .... Filter/AMP Envelope Attack Time = 00H to 40H to 7FH

(-64 to 0 to +63)

Recognition

When the instrument receives this message, the preset Filter/

AMP Envelope Attack Time value for the tone is changed to the

value that corresponds to the data entry MSB of the received

message. There is no change when the value of the data entry

MSB is 40H(0).

Filter/AMP Envelope Decay Time

NRPN MSB = 01H

NRPN LSB = 64H

Data Entry MSB = mmH

mm .... Filter/AMP Envelope Decay Time = 00H to 40H to 7FH

(-64 to 0 to +63)

Recognition

When the instrument receives this message, the preset Filter/

AMP Envelope Decay Time value for the tone is changed to the

value that corresponds to the data entry MSB of the received

message. There is no change when the value of the data entry

MSB is 40H(0).

Filter/AMP Envelope Release Time

NRPN MSB = 01H

NRPN LSB = 66H

Data Entry MSB = mmH

mm .... Filter/AMP Envelope Release Time = 00H to 40H to 7FH

(-64 to 0 to +63)

Recognition

When the instrument receives this message, the preset Filter/

AMP Envelope Release Time value for the tone is changed to the

value that corresponds to the data entry MSB of the received

message. There is no change when the value of the data entry

MSB is 40H(0).

RPN (Registered Parameter Numbers)

Format

Byte 1 Byte 2 Byte 3

BnH 65H qmH (MSB)

BnH 64H qlH (LSB)

n .......... Voice Channel Number = 0H to FH (Ch1 to Ch16)

qm ....... MSB of RPN

ql ......... LSB of RPN

Recognition

• RPN messages not defined by the instrument can also be

received, but subsequent data entry values after undefined

RPN messages are ignored.

• After the MSB and LSB of an RPN are received and the

applicable control parameters settings are made, the value is

set by receipt of the MSB of the subsequent data entry. The

data entry LSB is ignored.

Send

An RPN is sent whenever an operation that changes the

parameter assigned to the RPN is performed.

Pitch Bend Sensitivity ★

RPN MSB = 00H

RPN LSB = 00H

Data Entry MSB = mmH

mm .... Pitch Bend Sensitivity = 00H to 18H (0 to 24 semitones)

Recognition

The data entry LSB is always ignored.

Master Fine Tuning

RPN MSB = 00H

RPN LSB = 01H

Data Entry MSB = mmH

Data Entry LSB = llH

mm ll .... Master Fine Tuning = 00 00H to 40H 00H to 7FH 7FH (-

100 to 0 to +99.99 cents)

Master Coarse Tuning

RPN MSB = 00H

RPN LSB = 02H

Data Entry MSB = mmH

mm .... Master Coarse Tuning = 28H to 40H to 58H (-24 to 0 to

+24 semitones)

Recognition

The data entry LSB is always ignored.

RPN Null

RPN MSB = 7FH

RPN LSB = 7FH

Recognition

Once an RPN Null is sent, all received data entry MSBs and LSBs

are ignored until another RPN message other than RPN Null or

an NRPN message is received.

Program Change

Format

Recognition

• The value llH mmH is 00H 00H at the lowest pitch, 00H 40H

at mid-pitch, and 7FH 7FH at the highest pitch.

• You have to set both the LSB and MSB together to form a 14-

bit value and make a Pitch Bend Change message recognized

by the instrument.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AP45 Seite 48

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AP45

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info