Bedienungsanleitung Casio AT-3 (Seite 145 von 163) (Englisch)

586715

145

Zoom out

Zoom in

Vorherige Seite

1/163

Nächste Seite

E-143

Reference

Error Messages

Display

Message

Cause Required Action

Format 1. The current memory card format is not compatible

with this Digital Keyboard.

1. Format the memory card on the Digital Keyboard

(page E-132).

2. The memory card capacity is greater than 32GB. 2. Use a memory card with a capacity of 32GB or

less.

3. You are trying to use an SDXC card. 3. SDXC cards not supported. Use an SD or SDHC

memory card.

4. There is something wrong with the memory card. 4. Use a different memory card.

Card Full There is not enough room available on the memory

card.

Delete some of the files on the memory card to make

room for new data (page E-136), or use a different

card.

Card R/W Memory card data is corrupted. Use a different memory card.

No Card 1. The memory card is not loaded correctly in the

Digital Keyboard’s card slot.

1. Correctly load the memory card into the card slot.

2. The memory card was removed while some

operation was in progress.

2. Do not remove the memory card while any

operation is in progress.

No Data You tried to save a Digital Keyboard user area (user

rhythm, user rhythm song, etc.) that does not contain

any data to the memory card.

Select a user area that contains data.

No File 1. There is no MUSICDAT folder (page E-135) on the

memory card.

1. Create a MUSICDAT folder on the memory card or

format the memory card on the Digital Keyboard

(page E-132).

2. There is no loadable or playable data in the

MUSICDAT folder.

2. Move the file you want to load or play into the

memory card’s MUSICDAT folder.

Not SMF0/1 You are attempting to play back SMF Format 2 file. This Digital Keyboard supports playback of SMF

Format 0 or Format 1 only.

Protect The memory card is write-protected. Use the memory card’s write protect switch to enable

writing.

Read Only A read-only file with the same name you are trying to

use is already stored on the memory card.

• Use a different name to save the new file.

• Remove the read-only attribute from the existing

file and overwrite it with the new file.

• Use a different memory card.

Size Over 1. The data on the memory card is too big to play. 1. This Digital Keyboard supports playback of song

data files with a maximum size of about 320KB.

2. The data you are trying to load is too large. 2. The following is the approximate maximum data

sizes (per data item) when loading data into Digital

Keyboard memory.

User rhythm: 32KB

Song sequencer song: 159KB

User preset: 8KB

A total of approximately 128KB of user presets

(total of all 100 user presets) can be loaded.

Wrong Data 1. The memory card data is corrupted. Use a different memory card.

2. The memory card contains data that is not

supported by this Digital Keyboard.

Meas. Limit You tried to perform an operation during song

sequencer song editing or user music preset editing

that would cause the number of measures in the song

or chord progression to exceed 999.

Make sure your edits do not cause the number of

measures to exceed the 999-measure limit.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio AT-3 Seite 145

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Casio AT-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info