Bedienungsanleitung Casio CA-01C (Seite 159 von 167) (Englisch)

480711

159

Zoom out

Zoom in

Vorherige Seite

1/167

Nächste Seite

d Supplementary explanation of AT command

■ Commands which do not function

The following commands do not generate errors but will not function as a command:

・ATT (Tone setting)

・ATP (Pulse setting)

■ Command name: +CGDCONT=[parameter]

・Outline

Sets the access point name (APN) for packet origination.

Though this command is a setting command, it will not be recorded in non-volatile memory written by [&W], nor reset

by [&F] or [Z].

・Format

+CGDCONT=[ <cid>[ ,"<PDP_type>"[ ,"<APN>"] ] ]

・Explanation of the parameters

Sets the access point name (APN) for packet origination. See the following command execution example:

<cid>

： 1 ~ 10

<PDP_type>

： PPP or IP

<APN>

： Any value

*1：<cid> is a number for managing the access point name (APN) registered in the FOMA terminal for a packet

communication. For the FOMA terminal, you can register from number 1 to 10. As "mopera.ne.jp" is assigned to

<cid>=1, "mopera.net" to <cid>=2 and 3, and <cid>=4 to "mpr.ex-pkt.net", respectively by default, assign the

APN to cid5 to cid10.

*2：<PDP_type> is the connection method. For the FOMA terminal, you can specify PPP or IP. PPP is assigned to

<cid>=1 ,2 and 4, and IP is assigned to <cid>=3 by default. Specity PPP when you use the FOMA terminal as an

access point for Access point mode.

*3：<APN> is an arbitrary character string indicating each access point name.

・Operation performed when the parameter is omitted

+CGDCONT=： Sets the initial value to all <cid>.

+CGDCONT=<cid>： Sets the specified <cid> to the initial value.

+CGDCONT=?： Displays a list of values that can be set.

+CGDCONT?： Displays the current setting.

・Command execution example

Command for registering an APN name of abc (when cid is 5).

AT+CGDCONT=5,"PPP","abc"

■ Command name: +CGEQMIN=[parameter]

・Outline

Registers a criterion to be used to decide whether or not to allow the QoS (quality of service) that is informed from the

network side when PPP packet communication is established.

There are 4 setting patterns as described in the following command execution example.

Though this command is a setting command, it will not be recorded in non-volatile memory written by [&W], nor reset

by [&F] or [Z].

・Format

+CGEQMIN=[<cid>[ ,,<Maximum bitrate UL>[ ,<Maximum bitrate DL>] ] ]

・Explanation of the parameters

<cid>

： 1 ∼10

： None (initial value) or 5,760

： None (initial value) or 7,232

*1：<cid> is a number for managing the access point name (APN) registered in the FOMA terminal for a packet

communication.

*2：<Maximum bitrate UL> and <Maximum bitrate DL> set the maximum communication speed (kbps) of uplink and

downlink between the FOMA terminal and base station. When it is set to "None" (initial value), all speeds will be

permitted, but when set to 5,760 or 7,232, a connection at a speed of other values will not be permitted, and a

packet communication may not be connected.

・Operation performed when the parameter is omitted

+CGEQMIN=： Sets the initial value to all <cid>.

+CGEQMIN=<cid>： Sets the specified <cid> to the initial value.

+CGEQMIN=?：Displays a list of values that can be set.

+CGEQMIN?：Displays the current setting.

CA-01C_E_Manual_02.fm 48 ページ２０１１年５月３日　火曜日　午後１２時３０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CA-01C Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info