Bedienungsanleitung Casio CDP-235R (Seite 25 von 80) (Englisch, Spanisch)

723287

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Sampling Sounds and Playing Them on the Digital Piano

EN-23

You can use the procedures in this section to copy the drum

sound assigned to one keyboard key to another key, to

change the pitch of a sound, and to delete a sampled sound.

Press

(TONE) and then use

(10-key) to

enter the tone number (706, 707, or 708) for the

drum set you want.

Hold down

until the SAMPLING indicator

starts to flash.

Press

(FUNCTION).

This is the editing mode.

• While in the editing mode, you can copy a sound,

change the pitch of a sound, or delete a sound (each of

which is described below). Pressing

(FUNCTION)

again exits the editing mode and returns to step 2 of

this procedure.

■ To copy a sampled sound from one key to

another

While holding down the keyboard key to which the sampled

sound you want to copy is assigned, press the keyboard key

to which you want to copy it.

• A keyboard key that already has a sampled sound assigned

cannot be selected as a copy destination.

■ To change the pitch of a sampled sound

While holding down the keyboard key of the sampled sound

whose pitch you want to change, use the

(10-key) [–] and

[+] keys to change the pitch.

• You can change the pitch within a range of –64 to 63

semitones.

■ To delete a keyboard key’s sampled sound

While holding down the keyboard key whose sound you want

to delete, press

(RHYTHM). In response to the “DelSure?”

message that appears, press the

(10-key) [+] (YES) key to

delete, or [–] (NO) to cancel the delete operation.

• Deleting a sampled sound will return the key to its initial

default built-in sound.

Use the following procedure to change the rhythm part of an

Auto Accompaniment pattern to a drum set sound that you

sampled.

Press

(RHYTHM) and then use

(10-key)

to enter the rhythm number of the Auto

Accompaniment pattern you want.

You cannot use a Drum Sampling Tone in a user rhythm,

so do not select a user rhythm in the above step.

Press

(TONE) and then use

(10-key) to

enter the tone number of the sampling drum set

that contains the sound you want to use.

Press

(TONE).

This changes the rhythm part of the Auto Accompaniment

pattern you selected in step 1 to the sampled sound you

selected in step 2.

• To change the Auto Accompaniment rhythm part back

to its original sound, press

(TONE) again.

• Some rhythm part drum sounds cannot be replaced by

sampled sounds.

Editing Sampled Drum Set Sounds

Example: To copy sampled sound of key C3 to key D3

Flashes

lDrm1

Flashes at high

speed

Indicates keyboard keys that have sounds assigned.

Indicates the keyboard key whose sound was copied.

Example: To delete the sound assigned to key D3

Using a Drum Sampling Tone in Auto

Accompaniment (Drum Assign)

Disappears

CDP235R_e.book 23 ページ２０１７年２月９日　木曜日　午後４時３２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Casio CDP-235R Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info